My mates Z build.

Discussion in 'Member's Garage' started by SedatZX, Jul 8, 2013.

  1. SedatZX

    SedatZX Tyranus

    Ive had a few guys ask me to post this up so here it is. I dont know all the specs but i know his goal is to reach 450-500rwkw.

    What i know of the specs so far.

    Race ported heads
    Tomei everything in the heads (cams,cam gears etc)
    GT2860-RS x2
    Forged bottom end
    Haltech ECU
    FMIC
    Fuel System

    When i see him ill get a full list of mods.

    [​IMG]
    [​IMG]
     
  2. bRACKET

    bRACKET Do Right Dean

    500rwkw on 2860's will be a battle. E85 with that goal I'd assume?
     
  3. ProckyZ89

    ProckyZ89 Senior Member

    Agree ,
    2860RS, with 28 psi and e85 sure.

    I'd love to know the rest of the mods though, that fuel system looks a little overkill, high end stuff, but overkill.
    I think 380-450 may be more his range
     
  4. SRB-2NV

    SRB-2NV #TEAMROB

    Most i've heard out of GT2860RS(-5's) is 474rwkw on E85 and 28PSI. Not on a zed though.
     
  5. bRACKET

    bRACKET Do Right Dean

    Waiting for black beasts E85 tune before I make judgement :p
     
  6. SedatZX

    SedatZX Tyranus

    Last time i spoke to him he said that his turbos are bigger than disco potatoes so im not sure what he has. Yes he will be running the car on e85.
     
  7. rob260

    rob260 Administrator Staff Member

    Even on E85 500 is going to be a battle. Good luck to him looks like he has put alot of work into it.
     
  8. Chilledpain

    Chilledpain Z Reaper

    Is that a china spec fmic I spot on the car?
     
  9. kawasakirider

    kawasakirider New Member

    Looks like a HKS side by side FMIC to me?
     
  10. Chilledpain

    Chilledpain Z Reaper

    HKS are more pronounced and deeper than the unit pictured although it is kinda hard to make out. See below:

    [​IMG]
     
  11. ProckyZ89

    ProckyZ89 Senior Member

    I have the HKS side by side FMIC in question
     
  12. SedatZX

    SedatZX Tyranus

  13. SedatZX

    SedatZX Tyranus

    I got some more info from the owner:

    -The block has been bored/honed so therefor it is now a stroker? Car has bigger diameter pistons. I think it has a diff crank cause he was talking about how it was a 3.1 stroker etc (Didnt really pay attention cause i was sussing out my stroker kit)
    -Tomei Pon Cams, Tomei Cam Gears
    -Ported and Polished heads
    -Disco Potatoes (confirmed)
    -ID1000's
    -External Fuel Pump (1000hp rated)
    -Surge Tank
    -EBC
    -Haltech

    Thats all i can remember at the moment.

    There is a 2nd Z that comes in, black, tt manual, 2seater. Asked him to join the forums he wasnt interested in joining.

    Mods:

    Forged Bottom end
    2.5" SZ Full exhaust system
    Pods
    Bovs
    FMIC
    HKS 25/30's @ 9.5psi

    Future mods:

    Injectors + Pump
    ECU
     
  14. Chrispy

    Chrispy Pretentious Upstart

    No stroker kit for the VG I know of that goes to 3.1L. Could be done with a offset ground crank though.
     
  15. bRACKET

    bRACKET Do Right Dean

    Large enough pistons makes it a 3.1L doesn't it? Displacement goes to 3097cc or something?
     
  16. Chrispy

    Chrispy Pretentious Upstart

    Standard bore is 87mm giving a capacity of 2960cc.

    40thou over gives a capacity of ~3028cc.

    Need to go 80thou over to get 3098cc. CP make pistons this size, so could be what he has done.
     
  17. bRACKET

    bRACKET Do Right Dean

    Bah, what's 1cc between friends :p
     
  18. ProckyZ89

    ProckyZ89 Senior Member

    Black beast is a 3.1L

    I'm only a measly 3.03L lol
     
  19. SedatZX

    SedatZX Tyranus

    Ive got a vid of the Z running on my facebook page how do i link it here ?
     
  20. SedatZX

    SedatZX Tyranus

    The car pumped out 351rwkw + 957nm of torque at the wheels on its run in tune.. watch this space a monster Z is coming :)
     

Share This Page