VIC High end parts super sale (you know you want them !!!!)

All messages to be sent to tektrader69@yahoo.com.au Not through the PM system




Shift-I tacho and shift light fully programable. $150 posted

http://www.ecliptech.com.au/index.php?option=com_content&view=article&id=59&Itemid=109





Gates racing kevlar timing belt $145 posted



AEM capacitive discharge high performance coil pack driver. $270 posted



Fuel tank cover plate, goes around the nect of the tank behind the door.

NEW never fitted. $22 posted



6 point Sparco harness. Brand new $180 This the race spec harness NOT the cheap club spec one. $360 new if I remember right.



Alloy 2 litre fuel swirl pot with fittings. $80




Brand new Aeromotive fuel pump A1000 $400



AIM digital dash As new. $1000





Ex UAS Slot car Porsche 997 GT3 front brakes, Brembo 6 pot one pce forged calipers with titanium pistons, custom made front hats and caliper adaptors for Z32.

The rotors are massive 380mm and the metalurgy of the rotors is amazing. They are incredibly hard. Comes with racing pads

$4000



Ogura 2 plate clutch, rebuilt with new centre pressure plate, machined flywheel. This clutch is no longer available ( but parts are readily got from Nengun). The new one is smaller diameter. This is MASSIVE and heavy duty.

Big Horspower THIS IS FOR YOU................ $1300

More to come

 

Graham Ill take the gates timing belt & the fuel tank cover plate

Abraham

 

Is that the 4 or 8 channel aem unit? New, used or adapted to the z32 system already?

 

No probs. I will work out the suspension bits tomorrow for you Abe

 

Its new But unboxed. 8 channel. All the cables, connectors etc are there as well as the manual. I made mistake on the price unfortunately should have been $370. They are over $500 plus postage new from the US

 

Porsche 996 GT3 rear calipers for 330mm rotors, rebuilt with new seals and repainted.
You have to organize adaptors. $330

Brand new Exhasut cam gears Tomei $380

Used but as new intake gears Tomei $350


Custom top feed fuel rail and injectors.
800CC Delphi injectors brand new, custom fuel rail and modified lower plenum to suit injectors
$900

Nismo long wheel studs full set of 20 $140 the set


Z1 big throat throttle bodies New $280 the pair will throw in a set of stock ones so you can swap parts over


JWT cam springs for R4 and R5 $340

JWT r5 CAMS new $920

 

GT28R and GT28RS intake flanges $50

Steering wheel hub disconnector, german made CNC $140

Alloy half moon seals $18

Full set of ARP engine bolts, head studs, rod bolts, main bolts
$285

Solid diff mount kit $95

Front and rear goodrich brake lines braided
$180

remote oil filter kit from moroso. $70

Wheel stud press $30

solid steering rack mounts, Fire reinforced plastic. makes a huge difference to steering.
Cant buy these anymore. They are from D project Rare. $140



Molly outter tie rod ends. height adjustable for bump steer correction. $160

Inner tie rods Chrome Molly $150 the pair

Sx fuel reg new $180


AMS manifolds new $240


MOTEC M800 ECU with programming lead, CAN cable loom, manual etc.
New out of box but unused, $3800.......... new price $4700+

 

Much Much more to come...................................................

 

Graham ill also take the following:
Full set of ARP engine bolts, head studs, rod bolts, main bolts $285
solid steering rack mounts $140
Alloy half moon seals $18
Molly outter tie rod ends. height adjustable for bump steer correction. $160
Inner tie rods Chrome Molly $150 the pair
GT28R and GT28RS intake flanges $50
Nismo long wheel studs full set of 20 $140 the set

Abraham

 

Ill take the 60mill TB.

 

Damn you!! Lol ill take second chair on the throttle bodies

 

There another 60 items to list yet So keep coming back to the thread

 

Simtec Splitter, cost me $550 USD plus freight (which was horrible)

Selling this for $540 and am throwing in a Z32 bar to cut up and use with it.

Can be picked up at the nationals. It also has side canards which are an option

 

Turbo outlet flanges, 5 bolt for GT28R and 28RS $40 the pair



Fully forged VG30DETT engine. Never been run and fresh/as new, Add manifolds, turbos. $5800



rear subframe bushes solid alloy $120



Fire extinuisher with seat bracket made by me. Fits in front of the passenger seat $30



rear TT subframe, all bushes removed ready for repaint and solid b ush fitting. $60



Power steering rack used but good. No leaks $140



Carbon cannon mufflers, lightest I have even picked up. Just needs a clean and polish. 2.5 inch in and 4 inch out. Look awesome. $200 the pair.



genuine BOMEX glass front guards, very rare and super light $390 the pair



Silver bonnet $100



Custom Ross racing balancer. Meant for use on car with NO air con. It also has a dry sump drive sprocket. This was made for the Slot car but John changed what he wanted. This is a one off from Ross. $550



Alloy GT style rear wing by C West double decker. This wing looks AWESOME and is adjustable for down force $300




Bride seat rails for Z32 low profile $380



Z1 alloy drive shaft for manual 2 seater special thick all version $400



More tonight......................

 

Graham ill take the following aswell

Turbo outlet flanges, 5 bolt for GT28R and 28RS $40 the pair
Fire extinuisher with seat bracket made by me. Fits in front of the passenger seat $30

Abraham

 

Graham, is that front bar available? If it's uncracked, I'm interested.

Where does the fire extinguisher bolt up? Also interested keen on that please.

 

Fully forged VG30DETT engine. Never been run and fresh/as new, Add manifolds, turbos. $5800

***any more details on the internal parts/head work of engine? (Sorry to be a pain but others may ask as we'll?

Also curious about one piece tail shaft Pm sent

 

Tomei exhaust cam gears, is there a difference between series 1 and series 2 fitment?

If there is, and it's series one, dibs + AMS manis.
How much would postage be to 6056?

 

If those Bride rails weren't low profile I'd buy them... But since they are, I wouldn't be able to see over the steering wheel! D: