Zed's dead baby... :(

Discussion in 'Technical' started by Benny_C, Jun 4, 2011.

  1. s_t_r_e_t_c_h

    s_t_r_e_t_c_h flammin zed!!

    That sucks.. the things this car has gone thro and still lived on.. This car started after going under water!

    Would suggested you do the rebuild. You have a daily car, might as well fix the zed properly :)
     
  2. Wizard

    Wizard Kerb side Prophet

    My thoughts

    Drop a 2nd hander in with your bits on to get you back on the road asap as you were with a minimal of fuss.
    Then depending on the damage, use your current engine for the big hp rebuild,
    Taking your time to do it properly as money permits, collect the bits, rods, pistons, bearings, valves, cams, turbos etc
    When you have all the parts, get it machined to suit and have the time of your life putting it all back together.
    Then it's just a matter of swapping them over, selling your old motor to recoup some of the expense.
    Did i mention, been there done that.:)

     
  3. rollin

    rollin First 9

    If it was me, id buy a second hand motor, strip the heads , have them checked, do a metal head gasket to lower compression a touch, ARP head studs and swap all your goodies onto it.

    You can get an idea of how the bores look while the heads are off and most of the stripping needs to be done for turbo swap, changing all hoses and timing belt anyway
     
  4. gmbrezzo

    gmbrezzo Moderator

    Wow, thats sad to hear.
    That car has so far has had a very interesting and colourful life.
    good luck with the monster rebuild. It'll realy be something to see at zedfest.
     
  5. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Know how you feel ...

    better off rebuilding to your budget instead of a second hand engine ..
    nothing beats a new :br:
     
  6. stevearm77

    stevearm77 NA Compression + TT Boost

    Man you summed it up right there, never read a more accurate description of a Z before!! They are c**ts, but still a great car!!
     
  7. MagicMike

    MagicMike Moderator Staff Member

    Sorry to hear Benny :( Sounds very similar to what happened to Cara's engine after we did the plenum pull. Snapped locating pin upon startup after re-assembly. Top end stopped, bottom end kept going :(

    I have 3 week off coming up if you want a hand to swap engines out/in ;)
     
  8. RENZED

    RENZED Girl in the black beast

    Oh no..horrible news :(...sorry to hear Ben..
    Can't believe something gave way with your zed since its been through everything! Floods, towing, many kms..

    Well I guess you just gotta look on the bright side..that your Monster Rebuild just came a little earlier then expected..
     
  9. SIM300

    SIM300 FAKE MODERAT0R

    Bugger!

    [​IMG]
     
  10. r33k

    r33k 'I reek of Englishness'

    Shouldn't those green ones have $100 printed all over them?

    I had one... once... before I had a Zed...
     
  11. a2zed

    a2zed Guest

    I agree with Ron, drop in a good runner with your bits. Build another as time/money permits, will also give you time to accumulate some goodies which may be out of reach if you're on a time crunch to get her going quickly.
     
  12. 90TTZ

    90TTZ Back From The Dead

    Sad news Bro but you can always look on the brighter side that something better will come out of this.

    Looks like the Surf is going to come into full commission sooner than later hey :)
     
  13. Adamness

    Adamness Active Member

    You could just use the surf as your daily for a few months and build up a nice engine? You already have injectors and turbos/manifolds etc so most of the cost is already taken care of?

    Just need a rebuild kit, some forged parts and some labour for assembly and porting and you're good! Really you're not gonna get too much more power out of your hiflowed turbos, just reliability of forged parts and a bit better flow from a light port?

    If you're thinking of going bigger turbos though then its a bit different haha!

    As a wise man once said, just my $0.02 AUD worth.
     
  14. Benny_C

    Benny_C About as subtle as...

    ^^ I think this will be my route ^^ :zlove:

    ...and
    well, this may be the case yet. I'll work over some sums and if i can handle not driving her for a few months, then i might use this opportunity to go all out and just do everything. Turbos, cams, porting, forging, etc.
     
  15. Chrispy

    Chrispy Pretentious Upstart

    Dooooo it! I'll be your friend! :D
     
  16. rollin

    rollin First 9

    While the US dollar is good im getting forged pistons for mine, CP delivered for around 800.

    I cant help but think we are at the max of these turbos already though Ben, so it will be more for durability with mine, maybe i could ring another 20-30hp with more tuning
     
  17. mafi-zed

    mafi-zed the resident hoon

    +1 for siezed cam, take the belts off and try and rotate the cams by hand
     
  18. smeath01

    smeath01 New Member

    i want to cry and its not even my car, monster rebuild benny. may the zed live on in 600+hp spirit
     
  19. pexzed

    pexzed Forum Administrator

    Damn Benny!!

    But VG awsomeness will surely follow :br:
    I think Wizard is on the money.
    Gets u back on the road ASAP, then you have your base for the big rebuild.
    Also another excuse for a Dalby engine pull/push if Karl has the time and motivation :p
     
  20. zedboy

    zedboy Active Member

    Unfortunate Benny... hope I don't see posts with '320kw pops your motor'. :rolleyes:

    If you can put up with a daily for a few months just pull the engine once instead of putting in another motor to then pull it again.
     

Share This Page