NSW Tech day/sell & swap... Sunday, January 16

Discussion in 'Coming Events' started by mikemd, Dec 31, 2010.

Thread Status:
Not open for further replies.
  1. mikemd

    mikemd New Member

    Thanks, Rob...
     
  2. Anti

    Anti 14.7 x 14.7 = 44.1

    Anyone got a breaker bar?
     
  3. rob260

    rob260 Administrator Staff Member

    Yes for what and what drive?
     
  4. Mikey5555

    Mikey5555 Grid Runner

    Ive got some :)

    1/2 inch drive
     
  5. Anti

    Anti 14.7 x 14.7 = 44.1

    I don't know but apparently I need them to do my O2's. If you two could bring them along that'd be great :)
     
  6. Mikey5555

    Mikey5555 Grid Runner

    A 22 ring spanner should be able to do it :)
     
  7. A-Bris-Z

    A-Bris-Z Carcraze

    I cant see how?? Have you actually done O2s with a ring spanner?
     
  8. ZXDEVIL

    ZXDEVIL Active Member

    I used an open ended spanner, same concept tho, we are talking on NA's here, less things in the way... the TT's with all their extra hardware means there is much less room to move down there.
     
  9. Mikey5555

    Mikey5555 Grid Runner

    Sorry, open end spanner...

    that was my fault :(
     
  10. Mitch

    Mitch Has one gear: GO

    Myself (mitch) and Larlok (Joe) will be there sunday, making the trek from sunny (and dry) Newcastle :D
     
  11. Mikey5555

    Mikey5555 Grid Runner

    Ok guys i've got something I need to get done on my car :D

    Has a wicked exhaust leak after installing TTZ headers so im gonna be solving that on the day :)
     
  12. zedboy

    zedboy Active Member

    You have a pm...has it gotten worse Mike?

     
  13. zedboy

    zedboy Active Member

    Actually does somebody want to help me bleed by GTR Brembo's if I can paint them on Saturday???
     
  14. mikemd

    mikemd New Member

    Hey, Rob, do you have header to exhaust pipe gaskets (I guess that's the terminology)? Can't drive with windows down...
     
  15. Mikey5555

    Mikey5555 Grid Runner

    It hasn't gotten any worse Matt, and I can avoid the noise all together if i drive at 1/4 throttle, so i'll baby it round until sunday :)
     
  16. mikemd

    mikemd New Member

    Guys, just a thought... if anyone is unable to eat barbecue snags (sausages) on BUTTERED bread, please bring your own lunch, as this is all that will be provided. And, because they're so good, the caterer (moi) is charging $25-bucks each... whether he gets it or not might be another matter! :):) Of course, you can be assured that the money would go to a good cause - my Zed!!! :)
     
  17. Mikey5555

    Mikey5555 Grid Runner

    I don't know how to bleed brakes at the caliper end, but I can pump them :p
     
  18. Mitch

    Mitch Has one gear: GO

    I know the process.
    Just get a piece of hose that will fit over the bleed nipple snug like, and a bucket/bottle and plenty of fluid. I'll bring the 10mm flare-nut wrench.
     
  19. ZXDEVIL

    ZXDEVIL Active Member

    Depending if they arrive before the 16th id like to install my new shocks and springs.. Does anyone have spring compressors? They are doable on a tech day arent they? So far as i understand the most time consuming part is removing the rear interior trim to get to the rear shocks... can do this the week before at home to leave more time for other zed schtuff :cool:
     
  20. pennyarvs

    pennyarvs New Member

    Can bring my spring compressors for you, mate. Just let me know if you need it on the day as it's a bit massive (not just those paired metal compressors)...



    Arvin
     
Thread Status:
Not open for further replies.

Share This Page