NSW Tech day/sell & swap... Sunday, January 16

Discussion in 'Coming Events' started by mikemd, Dec 31, 2010.

Thread Status:
Not open for further replies.
  1. Anti

    Anti 14.7 x 14.7 = 44.1

    I've got this same gauge in the same place :( Are you sure the front bar has to come off for a fender pull? Can't be got at by removing the wheel arch lining or something? I've got new hinges 'cause that's what I thought it was...
    I had this from a previous owner, it's simple to get rid of. Smack it with a hammer 'til it's vaguely straight and vertical. Then get some solid planks or something on either side and compress them together with a clamp. Should do it.

    When all's done, do yourself a favour and knock yourself up one of these. Took me 2 minutes with a spare lump of wood and a jigsaw. Saves your sills and allows you to still jack up your Z.

    [​IMG]

    I can bring that and a standard scissor jack to aid with the door raising if you like? hopefully we can get mine done too. You can have the hinges if I don't need them and yours are gone.

    Anyone reckon they could help me with my O2's? need to get them if so...

    Dude just throw some random plates on there, you'll be fine for a day

    (going to get flamed for that)
     
  2. pennyarvs

    pennyarvs New Member

    Lock it in, guys...

    1. mikemd
    2. pennyarvs -- confirmed
    3. Steven
    4. Mikey5555
    5. Anti
    6. srb2no
    7. SRB-2NV
    8. ProckyZ89
    9. Madcow
    10.ZXDEVIL
    11.larlok
    12. Zedboy
    13. A-Bris-Z
    14. BlackZX
    15. Chili
    16. attila.Z
    17. rob260
    17. Hidds
    18. CUSTOMTT
     
  3. SRB-2NV

    SRB-2NV #TEAMROB

    '
     
  4. Dave Budden

    Dave Budden The Bizz!

    Hi,I've some 280zx parts, can I take them along to sell? & what time does this start & finish please?
    Thankyou.
     
  5. A-Bris-Z

    A-Bris-Z Carcraze

    Thanks for that!


    I can bring an O2 sensor socket and a 1/2 inch universal joint (may need 22mm impact socket as well), but we will still need a breaker bar and some extensions. MoulaZX helped me with mine, if he is coming maybe he can bring these??
     
  6. Madcow

    Madcow Active Member

    oh and just into relation to my issues of the power window, is somebody able to take a spare motor. might need it if it turns out to be the issue.
     
  7. BlackZX

    BlackZX New Member

    Haha... its aight... its only a matter of time till I get rego for it, and in the mean time, pennyarvs said he will help with the suspension, so should be good for the next Tech Day.. whenever that is... Can't wait to go for a cruise in my car... :)
     
  8. mikemd

    mikemd New Member

    Start time is around 9am... you are welcome to come earlier and start on any task you want done, but I have to pick-up fresh food supplies for lunch and will open the factory unit around 9am. Finish time is when the last car leaves....
    You can bring anything you like to sell, so long as nothing is left behind at the end of the day. Does not have to be Zed or car-related.
     
  9. Dave Budden

    Dave Budden The Bizz!

  10. attila.Z

    attila.Z Awesome member

    im in on this. passenger one is loose and bouncing around. not even finger tight. Would appreciate these tools if you have them
     
  11. Steven

    Steven Active Member

    Clearly display the date that this will be held

    Clearly display the date that this will be held...

    is it the 9th, 16th, or 23rd.

    Better still create a new thread with the correct date.
     
  12. pennyarvs

    pennyarvs New Member




    :br:
     
  13. mikemd

    mikemd New Member

    Sorry Steven... the date is definitely the 16th (subject to weather. If we have to cancel it will be the 23rd). I had requested the Mods to change the original thread date from the 9th straight after initial posting, but it didn't happen... oops.
     
  14. K-zed

    K-zed Secret Squirrel

    Who did you PM the request to Mike? I never saw any message but will change now, ok. :zlove:
     
  15. mikemd

    mikemd New Member

    Thanks Rob... the request was sent to "Contact Us"...
     
  16. Anti

    Anti 14.7 x 14.7 = 44.1

    Lock it in, guys...

    1. mikemd
    2. pennyarvs -- confirmed
    3. Steven
    4. Mikey5555
    5. Anti -- Confirmed - Martin
    6. srb2no
    7. SRB-2NV -- Confirmed
    8. ProckyZ89
    9. Madcow
    10.ZXDEVIL
    11.larlok
    12. Zedboy
    13. A-Bris-Z
    14. BlackZX
    15. Chili
    16. attila.Z
    17. rob260
    17. Hidds
    18. CUSTOMTT
    Sounds good :) I'll PM him.
     
  17. Wizard

    Wizard Kerb side Prophet

    Don't think

    I will be there Mike, having my own private Tech day(s), see build thread.:D
    Have fun.:)
     
  18. MoulaZX

    MoulaZX #TEAMROB

    Can't make the 16th. I can make the 23rd though?

    MoulaZX
     
  19. mikemd

    mikemd New Member

    Bummer, Wiz... you'll be missed. Good luck with yours. If you can use a hand just let me know. :)
     
  20. K-zed

    K-zed Secret Squirrel

    That explains it.... Members should use PM only. 'Contact Us' is designed for non-Member contact but is rendered useless by SPAM.
     
Thread Status:
Not open for further replies.

Share This Page