Zeds - an inigma...

Discussion in 'Technical' started by mikemd, Dec 2, 2005.

  1. mikemd

    mikemd New Member

    What is it with these cars?? Beautiful to look at, fun to drive, hugely ego-boosting....then, overnight, just after a trouble-free, exhilarating drive (not high-speed), when you feel at peace with the world and your car, the thing starts next morning (today) with a tremendous 'clatter' in the front (passenger side) of the engine...!!!
    Oil change 10 days ago; oil pressure OK; noise LOUD!!!
    Any clues, please...?? Would it be safe to drive to workshop to get proper diagnosis (engine continues to idle OK...just loud 'clatter')??:sick::sick:
     
  2. mikemd

    mikemd New Member

    Enigma...

    OK...so I spelt 'enigma' wrongly!! Still like to know if anyone can give advice on whether car is 'safe' to drive in this condition...??
    Help, pleeease!!
     
  3. Egg

    Egg ....

    Anymore info?

    What sort of clatter?
    Front of the engine rear?
    Did you try turning on your lights and see if this makes it worse? (just thinking maybe alternator as something similar happened with a previous car)
     
  4. mikemd

    mikemd New Member

    Anymore info...

    Noise is from front of engine (high up..as in tappet noise in old-style engines, with which I am familiar), only much louder. Instead of typical tappet noise it is more of a 'clatter' timing-chain type noise, but seemingly from in top front of plenum....
    Thanks for response.
     
  5. Egg

    Egg ....

    Just strange...

    ...how it manifested overnight.
    I'd be hessitant to drive it. Perhaps a lifter died?
    Sorry I can't be anymore help.
    Good luck,
    Egg
     
  6. MexiCandu

    MexiCandu Grumpy of the Grampians

    Sounds like lifters to me.

    What weight oil are you using?
     
  7. Tektrader

    Tektrader Z32 Hoe, service me baby

    Wonder of the timing belt tensioner may have seized?

    You wouldnt want to drive it like that.
     
  8. beaver

    beaver southern zeds

    If your game, run the

    engine after you warm itup, to round 3.5 4thou rpm
    listen if noise gets louder or dies away.if louder
    switch off, if its lifter clatter, noise should die off
    after a short time.if you put a lighter weight oil in
    at the last service,( it takes a little time for residual thick oil to mix with the new oil) and
    then suddenly you get that noise.
     
  9. K-zed

    K-zed Secret Squirrel

    Seconded

    Tensioner letting go is common, DO NOT even start the engine until checked out!
     
  10. mikemd

    mikemd New Member

    It's LIFTERS...!!!

    Thanks, guys...am assurred by local mechanic who has worked on other local Zeds that my trouble is the hydraulic lifters. He wanted me to leave the car with him, but I would prefer to have JustJap's mechanics do the job as they know this particular engine....Which brings up my earlier point, would it be (reasonably) safe to do a careful trip across to Kirrawee....???
    Oil used is Valvoline 10/50; have used it for years, including the past 3yrs in the Zed.
    Thanks again for all the advice; much appreciated. By my fourth re-build I should be able to offer this type of help to other 'Newbies'...;):thumbsup:
     
  11. beaver

    beaver southern zeds

    If there really making noise, even

    after getting fully pumped, i would take it "very" easy
    best thing to do is get a cab!
     
  12. Wizard

    Wizard Kerb side Prophet

    Why would you

    Drive from Castle hill to kirrawee (Aprox 50k's)
    when you have two exellent Zed workshops in Castle hill to chose from.:wacko:













    0
    .0
     
  13. IB

    IB ?????

    Thirded
     
  14. mikemd

    mikemd New Member

    Here's why....

    Original motor in this car ' blew' not long after being purchased from one of these "excellent" Zed workshops!! For this and events following would not go near either!!:angry:
     
  15. henpecked

    henpecked very small member

    they are ??

    as I am new, and somewhere arround that area, - I assume that UAS is one, what is the other ?
     

Share This Page