z1 radiator na to tt bar

Discussion in 'Technical' started by Stef, Jul 13, 2015.

  1. Stef

    Stef Active Member

    Z1 have a conversion bar to fit a tt radiator in the na bottom supports. They say it does not fit the oem tt radiator but a number of aftermarket ones like koyo , m mishimoto ams and howes.

    Anybody know how it does not fit the oem one and if any of the eBay ones will fit ?
     
  2. Anti

    Anti 14.7 x 14.7 = 44.1

    Worth noting that the NA radiator is far wider than the TT, so should only be considered in an NA if you're doing a TT swap..
     
  3. Stef

    Stef Active Member

    Swap well under way. Was going to move the na supports but then found the z1 kit which seems like a much simpler solution
     
  4. Anti

    Anti 14.7 x 14.7 = 44.1

    Oh, cool! Moving the supports would be a bit of a pain but doable.
     
  5. bRACKET

    bRACKET Do Right Dean

    Have a TT PWR Twin Pass and works perfectly with the conversion bracket.
     
  6. ryzan

    ryzan Black Mesa? Fat chance...

    Bracket is pretty average, doesn't fit my koyo rad. Just move the mounting points and be done with it. Radiator will sit a little bit higher at the top with the z1 bracket as well.
     

Share This Page