TwinZ Design Type 2 Rear Bumper/Diffuser for 2+0 and 2+2

Discussion in 'Group Buys' started by rob260, Nov 6, 2010.

Thread Status:
Not open for further replies.
  1. rob260

    rob260 Administrator Staff Member

    Hey guys, finally able to start a Group Buy going for these. The bumpers are coming direct from TwinZ to us via Unique Auto Sports. The bumpers are FRP fibreglass and include rear diffiser as pictured.

    2+0 Pics

    [​IMG]

    2+2 Pics

    [​IMG]

    [​IMG]

    Promo Video

    http://www.youtube.com/watch?v=PcNc40VR44E

    The cost per unit is $869USD for 2+0 or 2+2. This includes freight from Twinz in Peru to Unique Autos in Sydney. To confirm your order I will need $500AUD deposit up front. The balance owing will calculated when UAS make payment for the goods.

    Please note due to fluctuating exchange rate and all prices from the Twinz being quoted in USD I cannot give an actual price in AUD. As above when UAS make payment for the goods we will have a conversion rate to work with and can calculate the balance owing (to total $869USD) accordingly. We need ten orders or more to go ahead, at which point UAS can put the order in with Twinz. These will be made to order and sent via container from Peru so yes there will be some waiting involved.

    Freight from UAS to you will be $100 Eastern States (metro area) or $200 all other states. Freight prices are quoted in AUD.


    PM me for details if you want to get in on the buy, the sooner I have ten confirmed deposits the sooner we can place the order the sooner we get the bars.
     
  2. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    1/ Black Beast
    2/
    3/
     
  3. NVZ32

    NVZ32 Expensive Garage Ornament

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/
     
  4. Zano

    Zano Member

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
     
  5. Drokk

    Drokk Member

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ Drokk ( 2+0 )
     
  6. ZeDHeD

    ZeDHeD Well-Known Member

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ Drokk ( 2+0 )
    5/ ZeDHeD (2+2)
     
  7. lidz

    lidz Well-Known Member

    In! awesome work from everyone involved, thanks guys!

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ Drokk ( 2+0 )
    5/ ZeDHeD (2+2)
    6/ Lidz (2+2)
     
  8. beaver

    beaver southern zeds

    What

    size plate fits the recess on the 2+0 bar rob?
     
  9. Drokk

    Drokk Member

    I'm out for now

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ ZeDHeD (2+2)
    5/ Lidz (2+2)
    __________________
     
  10. rob260

    rob260 Administrator Staff Member

    Good question, I will follow up.

    I guess we would all like to see them made to suit aus number plates, will ask about that too
     
  11. Zano

    Zano Member

    Rob260.....Could you please find out if the indicator holes is an available option for deleting.
    Thank you!
     
  12. rob260

    rob260 Administrator Staff Member

    Hmm I don't think they will do custom custom, especially at the price quoted. It's one thing to make ten bars the same (ie ten with aus spec number plates) but I don't know if one off mods will be an option. But hey it can't hurt to ask and I will when I hear back re the plate size.

    Worst case I will do you a good deal on clear sidemarkers for the rear :cool:
     
  13. laam

    laam Member

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ Drokk ( 2+0 )
    5/ ZeDHeD (2+2)
    6/ Lidz (2+2)
    7/ Laam (2+2)
     
  14. NVZ32

    NVZ32 Expensive Garage Ornament

    i think there the same size as here., so the plate dont fit anyway. the ends need bending up.. or like me you could just get personalised plates with usa rear and slimline front, same as what you do here to fit a plate without bending the ends
     
  15. rob260

    rob260 Administrator Staff Member

    Orders

    Guys as soon as we hit the ten I will start asking for deposits.

    1/ Black Beast
    2/ NVZ32 ( 2+0 )
    3/ Zano ( 2+2 )
    4/ Drokk ( 2+0 )
    5/ ZeDHeD (2+2)
    6/ Lidz (2+2)
    7/ Laam (2+2)
    8/ Rob260 (2+0)
     
  16. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    I think Drokk has pulled out for now ...

    And yes come on guys not going to get this deal again anytime soon with current exchange rate!

    edit ..prefer the numberplate section as it is ..over the vented section .(ausspec plate are are too wide anyway and will cut into the top of diffuser).
     
    Last edited: Nov 7, 2010
  17. ichizora

    ichizora Loud

    I would be jumping on this ... but I need my $$$ to get mine on the road first :mad::(
     
  18. rob260

    rob260 Administrator Staff Member

    Realistically I think you will have plenty of time to save for the balance. Container shipping is usually 8 weeks plus time in customs etc plus time to manufacture the order. I mentioned to someone else I would think minimum three months between placing the order and the bars arriving here.

    If you can get your $500 deposit together that gives you a while to organise the rest.

    Also I doubt they will be available at this price again. To airfreight a single unit over would cost a small fortune!
     
  19. lidz

    lidz Well-Known Member

    I believe the number plate question has been raised before (cant remember if here or on yanky forums) & basically it's as is. As blackbeast has said if you make the number plate recess wider then it no longer flows with the diffuser, twinz has commented that this compromises the design & wasn't keen on changing it.

    Personally I dont want a modified version if its not all going to flow as it will bug the hell out of me.

    come on people, 3 more left!
     
  20. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    I'm in the same situation .. but not going to miss out on this.
     
Thread Status:
Not open for further replies.

Share This Page