TT engine for sale $950! +rims, samco TT radiator hose, upper control arms

Discussion in 'Car Parts for Sale or Wanted' started by attila.Z, Jun 16, 2013.

  1. OldRedZed

    OldRedZed Member

    Where are you in sydney ? I am interested in a few parts

    Greg ( OldRedZed)
     
  2. attila.Z

    attila.Z Awesome member


    Most parts located in Ashfield.
    What are you interested in? Send a PM.
     
  3. attila.Z

    attila.Z Awesome member

    This engine has to go. My friends are moving out of the house im storing it at soon, and I cant store it in my apartment.

    If it doesnt sell in the near future, I will likely have to remove what I cant to part out, and bin the rest of it.

    Which would be a massive shame considering the engine was running perfectly when it was removed!!


    Price drop to $950!!!! Or make an offer.

    I know i'd get a lot more if i had somewhere to store it until someone needed one. But I dont have space.



    In parts the engine could probably get me close to 950, so I wont sell it for anything stupidly low. But make an offer if you dont really need one, but could use a bargain engine etc.


    $950 for a good condition 1994 TT engine with manual turbos that have ZERO play!!! New plugs and sensors, hoses replaced often. Its in good nick. A few leaky oil seals, and a bit of rust from sitting where it is.


    $1000 and you get the lightweight flywheel thats fitted!!! 6 months old, cost me 400 delivered from uS.



    Come on somebody must want it. Nobody can sniff a bargain these days :p
     
  4. attila.Z

    attila.Z Awesome member

    Aftermarket Front upper control arms (camber arms)

    For sale off my zed.

    A set of unknown brand aftermarket front upper control arms.

    Had zero issues with these ever. You can see theyre still in good nick.
    Used to adjust camber of the front wheels. Replaces stock upper arms and uses existing bolts.

    If youre getting wear on the inner edge of your tyres, then you need some of these. When I had complete stock suspension i was buying tyres, and then failing rego on them a year later because the inner edge was worn down. Turns out hte 20-year old springs had sagged lowering my car, and putting hte camber out. Chances are if you have stock springs this is happening to oyu too.

    A set of arms is a lot cheaper than buying $1000 worth of tyres that last a year :( It was a worthy investment. Did the job. No need for fancy brand names (this might be a fancy brand name im not sure :p nothing labelled).


    $100 delivered and theyre yours!!!


    Note: slight surface rust from not being used for 9 months or so. Spin the threads a few times and itll be gone. Theyve been sitting in a shed.

    [​IMG]


    [​IMG]
     
  5. attila.Z

    attila.Z Awesome member

    SAMCO red silicon TT upper radiator hose

    Stock pipes look bad, and they split easy.

    Noname silicon hoses are thin, and flex under heat easily. Mainly noticed with intake hoses, but coolant hoses are more important. You dont want one of them to split..



    SAMCO Sport Hoses on the other hand are known to be the thickest best fitting silicon radiator hoses out there for our cars. Cost an arm and a leg new... dont degrade at all over time since its silicon, and they wont harden...

    so pretty much this hose is as new, just a little bit dusty....

    for a bargain price of..... $60 delivered!!!!

    [​IMG]
     
  6. attila.Z

    attila.Z Awesome member

    Speedy wheels Inferno wheels+tyres. 18inch aftermarket rims.

    Bought these a few years back to replace my stock cracked leaky rims.
    Note the car sat for 6 months. Then I drove it to a friends to part out. Therefore the brake discs had rusted and you can see the rust scraped off the brake discs on the inside of these rims. The rims themselves are not rusty. I just havent cleaned them yet :p


    The tyres cost 250 each, and are at 80% tread. The rims alone cost me 1200 when I bought them. So 2200 was the cost to me.

    They have however aged a few years in my hands.
    I am willing to let the whole package, with Tyre Placard label from a 2k series to make them legal :) go for...... $950 picked up! If you like them but that seems too much, make an offer. I am just trying to clear out all my remaining zed stuff. Although these are happily stored in my bedroom :p so no rush.


    Attila.



    Brand: Speedy wheels
    Type: Inferno
    Front size: 18x 8.0 JJ
    Rear size: 18x 8.5 JJ
    Front Tyres: Kuhmo KS1 265/35R18
    Rear tyres: Kuhmo 245/40 ZR18
    Tyre tread: As can be seen, they all have heaps of tread. Two of the tyres were required to get my last green slip. So they were used for like 4 months, driving to work and back.
    Theres like 8mm tread on all four tyres, so id say 80%?

    As a bonus I will also provide a limited edition Tyre Placard sticker that makes these wheels legal. Legally you can only go up one inch from the size on your tyre placard. This is what the cops check if they want to hassle you.
    Most zeds came with 16inchers, so 17 is ok bigger and they can book you. However the 2k series zeds came with 17" wheels. I have a tyre placard sticker that has not been fitted yet. It will allow you to legally run these wheels :)

    They are nice and wide, with plenty of grip. But not so wide that you have to flare the guards or anything like that. Perfect practical fitment id say. No need to space anything either, they were test fitted when i bought them to make sure the offset was good.

    I have once upon a time done a DIY tyre red wall on the tyres, which has over the year in storage started looking a bit dodge. Pictures show. You can clean it off, or repaint it with minimal effort :)

    Also the rims are dusty. As you can see I have not shined them and photoshopped them. The fitted pics show it in standard shape, thats how they will look on yours too. But yes they will need a wash :) Dusty, with crap on the inside from the disc brakes not beign used for a year, then going around the block to scrape the rust off the brakes :p oops.




    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]









    Pics of other coloured zeds with the same wheels:

    [​IMG]

    [​IMG]

    [​IMG]
     
  7. Vader

    Vader Just another guy

    Threads merged as multiple listings are against forum guidelines.
     
  8. attila.Z

    attila.Z Awesome member

    how is anyone meant to find an engine in a rim sale thread Vader?


    can u please remove everything except the engine then and put back the engine sale thread to what it was?
     
  9. attila.Z

    attila.Z Awesome member

    or can you make the thread title 'TT engine for sale $950! +rims, samco TT radiator hose, upper control arms'
     
  10. Vader

    Vader Just another guy

    Title changed.
     
  11. attila.Z

    attila.Z Awesome member

    Guys the engine has to go this weekend or next.

    $500



    This weekend or next I will be pulling it apart removing sensors etc which i can sell and dumping the rest. Not allowed to store it at my friends anymore.

    email me on attila.zoltan@hotmail.com for prompt reply.
     
  12. attila.Z

    attila.Z Awesome member

    TT engine is SOLD.


    still have the wheels and other bits for sale.

    Thanks guys.
     
  13. attila.Z

    attila.Z Awesome member

    Rims+Tyres+Tyre placard package down to $900. Have a look guys.
     

Share This Page