TightFit Silicone Hoses - Couplers, Reducers, Bends, etc.

New to the market and already making a name for themselves; TightFit silicone hose brings imported German Wacker silicone to the Australian market that out-performs the competitors and even rivals domestic China silicone in price! TightFit silicone has a higher working temperature and high working and burst pressures.

TightFit silicone features:

• Temperature range: -60 to 240℃
• Working Pressure: 0.55Mpa
• Burst Pressure :1.65Mpa
• Available in Black and Blue

TightFit Silicone Hose Coupler (2.0") $15ea -
TightFit Silicone Hose Coupler (2.5") $18ea -
TightFit Silicone Hose Coupler (3.0") $21ea -


TightFit Silicone Hose Reducer (2.5" to 2.0") $22ea -
TightFit Silicone Hose Reducer (3.0" to 2.5") $23ea -



TightFit Silicone Hose 45degree Bend (2.0") $24ea -
TightFit Silicone Hose 45degree Bend (2.5") $25ea -
TightFit Silicone Hose 45degree Bend (3.0") $27ea -


TightFit Silicone Hose 90degree Bend (2.0") $27ea -
TightFit Silicone Hose 90degree Bend (2.5") $29ea -
TightFit Silicone Hose 90degree Bend (3.0") $31ea -

"....everyone loves a TightFit"

Free postage Australia Wide!!!!

For more info or to place an order without using PayPal, please PM or email tom@pzp.com.au

 

How long will these be available for Tom? Still be available in a month?

 

No no hahaha, definitely "wacker" and definitely German tech! Hehehehe

 

Yes mate, we are now dedicated to keeping them all 100% in stock and always low priced!

 

I thought silicon couplers would be cheaper than this? I'm on the market for a few for my FMIC piping, it came with a a mismatched set of blue and cut up OEM pipes.

 

First request

I would like a set of silicon joiners to replace the oem ones the connect the input side of the turbos to the hard pipes that feed them air from the intake I'm not sure of the size but if u can supply them a set of blue ones would be good.

 

Not particularly.... We aren't advertising as the 'cheapest' silicone however we are priced lower than companies such as Just Jap. Plus they use the premium silicone, not domestic China stuff.

 

Hi Raheen,

Are you looking at the compressor inlet side of the turbos? As in the extremely large pipes that have the breathers on them from the Valve covers?

 

My bad the two little onea on the out put side of turbo, the oem ones are black the thin end is about 1 3/4 inch in diameter

 

Ah yes, the compressor outlet hoses.... I believe one of them is a 2" straight coupler (which we do have in stock) and the other one is a 2" to about a 1.5"-1.75" reducer. I don't actually have this one available however I can get them made. Do you think there would be interested in the Z community for these two hoses? If so I can place this hose on the next production run of silicone and offer them to you guys in a 'kit price' (cheaper).

 

Some forums are having trouble with the paypal cart when you hit the back button. In the event of this happening, please use our temporary website: http://tightfit.pzp.com.au/

 

Hi Tom,
I'm interested in these two hoses, have had a hard time trying to find out the size of the reducing one, bring on the kit : )

 

Do you think anyone on the aus300zx site would want to run a group buy for these? maybe someone can PM me about it and we can discuss the details. I could probably offer both pipes for $30 including freight if we had around 30 people in the group buy? Production time and freight would realistically take 5 weeks.

 

I reckon

It would be a reasonable gb, you may wont to consider a GB replacing all the oem stock joiners in the intake/intercooler piping/recirc etc.

I need to have a look see at my car and see what others I need, to finish off the front mount install. what diameter are the stock interncooler piping.

you could also look at a bulk run of polished instake hard pipes, bundle them with silicon.

 

Sure thing. I'll have to look into it however we'd definitely need numbers to make this happen as there is a lot of leg work in getting this done. I'd purchase the OEM hoses and send them over the be moulded for perfect 'OEM' fitments.

The stock intercooler piping is 2".

 

can you get 102mm 90degree elbows with ~100mm leg length?

 

Can you get 30mm 90 degree elbow?

 

I can get both of these sizes however I need to buy them in bulk lots. Unfortunately we won't be looking at buying 30mm bends unless there is a large order.

The 102mm (4") bends will be on our next silicone order (November shipment).

 

Pretty pwease