WA Parting out a white AUS spec (2+2) N/A

Discussion in 'Car Parts for Sale or Wanted' started by Anton, Mar 9, 2010.

  1. NAztyZ

    NAztyZ New Member

    As long as the mirrors are in good condition, i will take em. PM me your bank details and postage cost.
     
  2. rob260

    rob260 Administrator Staff Member

    Do you have power steering pump and bracket?
     
  3. MagicMike

    MagicMike Moderator Staff Member

    Want the little black screw cover thing from the top, passenger side of the centre console... You still got it Anton?

    Also want the ignition barrel trim bit - not the clear bit, the bit that goes around that :)
     
  4. Anton

    Anton New Member

    Mike, got a pic? or how many screws go into it? and the ign trim, do you mean the small ring or the whole steering coloumn cover?

    Rob, no engine bits, but I have the resovoir
     
  5. MagicMike

    MagicMike Moderator Staff Member

    This bit :) Passenger side.
    [​IMG]

    The other bit isn't the small ring or the whole column cover. I'm chasing the small bit that fits over the key release button and around the barrel. I'll try to find a pic of it. I bought one from coz but it is never going to fit - there must be a difference between old/new...
     
  6. Anton

    Anton New Member

    yep i should have the ign bit, will check for the other cover tomorrow morn
     
  7. MagicMike

    MagicMike Moderator Staff Member

    Thanks mate :) appriciated :)
     
  8. Zcar91

    Zcar91 New Member

    Hi Anton,

    I'm after the A/C Mode motor from an Aus-spec Zed. It's the small black motor adjacent to the heater-core tap. Unfortunately, you need to carefully remove/dissmantle the dash to get it out.

    Cheers
     
  9. Anton

    Anton New Member

    luckily the dash has been pulled :)

    got a pic of one in tact so I know what i'm looking for? if not then PM me and I'll send you some pics of what I think it is. Feel free to make an offer via PM as well
     
  10. mattah

    mattah New Member

    Weird request, but does it have the finned aluminium diff cover, and if so would you sell this separately? I could swap you for a Skyline diff cover to replace it even.
     
  11. Anton

    Anton New Member

    both have the finned cover but i'm not keen on taking them off as they prob aren't worth much seperately?
     
  12. Jinxed

    Jinxed Moderator

    rear bumper sold to me.....thanks anton, pick up saturday as arranged....
     
  13. Zcar91

    Zcar91 New Member

    Hi Anton,

    Any progress with the A/C Mode motor?

    Cheers
     
  14. Vizard

    Vizard Active Member

    **** i missed out on an infill panel again :(
     
  15. yellow_300zx

    yellow_300zx New Member

    i no how u feel man. i swear iv been chaseing one for like 2 years now haha. thay never last long :( or are cracked.

    ps: love ur avatar lool
     
  16. OZ-300

    OZ-300 Godfather

    Hi Anton,

    Do you have the power aerial (working) ??

    If so, how much to ACT??

    Cheers,

    Peter
     
  17. Anton

    Anton New Member

    I'll have to find a battery to check if the aerial still works, may be able to check it this weekend

    haven't checked the mode motor yet
     
  18. mattah

    mattah New Member

    What do you mean by both? I've got an R33 diff here and it doesn't have any finned rear cover.

    Depending upon how much you want for the diff and where you are I'd probably be interested in just grabbing it anyway. What's the ratio in the NA diff? It's not LSD is it?
     
  19. Anton

    Anton New Member

    I have 2 N/A diffs, thats what I meant by both, and yes they are both LSD's. they are 4.1 ratio

    I'm in bayswater, make an offer by PM
     
  20. infernomax

    infernomax New Member

    By any chance do you have Left + Right Rear seatbelts ? Please let me know. Cheers!
     

Share This Page