Nismo suspension bushes

Discussion in 'Non Technical' started by ryzan, Nov 13, 2013.

  1. ryzan

    ryzan Moderator Staff Member

    I've always wanted to completely re bush my car and have been trying to source all the bushes to do this for ages so I can begin my rear subframe overhaul. I wasn't going to settle for urethane due to its inherent design flaws and binding issues and new oem bushes can only be bought already fitted to the components. So after hours of research I've managed to source brand new replacement nismo bushes for every joint in my car. Half have come from the states and the other half direct from Japan. The biggest problem I've encountered is most retailers say these are nla. I've been slowly collecting them and today finally the last of the bits I need have arrived.

    [​IMG]

    I've also sourced some nismo rear subframe bushes from a 180 or gtr or something since Nissan doesn't actually list a replacement bush for the Z32 so will see how well these fit. Upon initial inspection they are almost exactly the same as oem bushes. Hopefully these bushes should last another 20+ years since I'm not exactly looking forward to this job. :zlove:
     
  2. Z32 TT

    Z32 TT Active Member

    Oh man..... Tough job. Will be awesome when done though!
     
  3. Anti

    Anti 14.7 x 14.7 = 44.1

    Super well done! I'll hit you up for some sources for a few of my components.
     
  4. ABZ300

    ABZ300 G

    Very nice indeed...keen to hear how the subframe bushes work out for you. Ryan you able to post up the part numbers & where you got each from? Or if you can list for how much would be even better, as it would help others interested in don't the same as you

    Abraham
     
  5. MikeZ32

    MikeZ32 das Über member

    Mine could do with a rebush of the whole lot. Any chance I could please grab a list of the part numbers and where they go? There are various bits I no longer need as certain parts are now pillow ball.
     
  6. ryzan

    ryzan Moderator Staff Member

    Yeah will put a list up sometime, need to go through the messy scraps of paper I've been handwriting on over the months to get an actual list out of it first.
     
  7. Anti

    Anti 14.7 x 14.7 = 44.1

    I smell a group buy... Rob?
     
  8. rob260

    rob260 Administrator Staff Member

    Yeah I'm keeping an eye on this -will do something with Nismo Japan if/when Ryan can confirm details
     
  9. ed300zx

    ed300zx Active Member

    I would be interested too. Nice work.
     
  10. LittleRedZX

    LittleRedZX Member

    Me too

    Would be interested in this Rob. thanks

    well done Ryzan..
     
  11. ZX1990

    ZX1990 2+2 TT Manual

    Id also be interested in a list and $$ for them......once I decide which subframe to keep - NA or TT...lol
     
  12. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Any chance you have come across Nismo Diff Bushes?

    .
     
  13. ryzan

    ryzan Moderator Staff Member

    The box on the top right :)
     
  14. Anti

    Anti 14.7 x 14.7 = 44.1

    What is the difference between these and regular OEM bushes?

    Super keen to deck out anything that I haven't already replaced with adjustable arms

    - Diff
    - Subframe
    - LCA front and rear
    - Rear tension rod
    - RUCA knuckle bush

    I think that's it...
     
  15. mikemd

    mikemd New Member

    Nissan 300ZX: Making owners mechanics since 1984
    Hahaha...Never noticed this one before. Absolute classic...!! :):)
     
  16. ABZ300

    ABZ300 G

  17. ryzan

    ryzan Moderator Staff Member

    That's the right part number, I'd not recommend dealing with rhdjapan though unless you absolutely need to, customer service is sub par at best. Originally I tried ordering these bushes through them, then without telling me they ended up sending half my order and weren't interested in obtaining the other bits for me. Their words were 'get in contact with us in a couple months when our new website is up and they should be in stock then'.
     
  18. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Where did you get them from ?

    As my poly diff bushes are already falling apart .

    .
     
  19. Anti

    Anti 14.7 x 14.7 = 44.1

    RHD Japan are shit. I ordered something two weeks ago and have so far received about 10 e-mails about some automated non-related crap, saying nothing about my order.
     
  20. bRACKET

    bRACKET Do Right Dean

    I ordered something from RHDJapan, no issues. It was a single low price item though...

    Also interest expressed on a bush GB :)
     

Share This Page