!!NEW!!Kurama Moulds & T Clip

Hey all,

I have a new Kurama Mouldings Set (doors and quarter windows) Brand new, not removed from plastic for a 2 seater.
chasing $200ono
Also a Targa clip (piece that goes in between targa shades and holds the glass ends in) for a 2 seater. Also brand new and never been fitted.
chasing $70ono

All offers should exclude postage and buyer will pay postage if required.

will consider swapping these for the same items from a 2+2 in the same condition.

cheers

z

 

Could I get a picture of the Targa Clip?

Cheerz,
Tom :zlove:

 

ooh ooh ooh !!!

Dibs!!!
I buy!!!
Me!
Me!
Me!
I win!!

 

Kurama Moulding set sold, Clip still avaliable.

cheers

z

 

Ah crap I have a 2+2 set and I want a 2+0 set

 

well, Ill give you $200 + Postage for your 2+2 set if you want?

do you need a T clip by any chance, Ill swap you that + cash your way as well.

 

Nah, I'll keep them. Chad reckons you can cut them down...

I have a slicktop, so don't need the Targa Hook...

 

not reckons. KNOWS . the doors will be the same. the 1/4 window ones you just measure it up against ur 2seater ones and cut them. then apply a little bit of black paint on the end and fit them. you wont even see the end anyway as there is a little black plastic flap that covers the ends

 

Kewl, thanks Chad

 

When I measured it, the 2 seater set I had was longer in the door than the four seater one so how do you make up the difference, or is it not noticable?

 

hrmmm how much was the difference ??? i have some 4seater door ones on my 2seater doors and they were the same ?

 

Yeah, wasnt much, maybe a few cm's.

However, its obviously WAY WAY too risky Chrispy so you should definately flog your moulds mate and get some correct ones!!

now who would want to buy a set of 2+2 moulds?

 

just cut the front off then.... u dont see the end anyway its behind the mirror fitting....

 

heres a link
http://www.conceptzperformance.com/...Type=NIS300&UID=20100325021015124.182.181.229

and some pics from my phone camera

 

and dis is for a 2+0?

 

how do you even take the t-hook off? :|

 

yep

 

its just about 6 screws under the lining.

 

Yeah

Take your roof lining down ( gently ), then 6 or 8 10 mm nuts to undo.
Easy as, Andy

 

Zeb, I will take the Targa clip so long as it can be posted in a cardboard box - don't want Aussie Post bending it on the way over. Please give a total cost posted to Carrum Downs 3201.

Cheers, Mikey.