NSW Its all up for grabs - Looking for interested parties (ie Dibs)

As life moves on, I just don't have the time to finish the zed project, have a large collection of mostly aftermarket parts that I have accumulated over the years, many from group buys.

NOTE: These parts are presently 50 km North of Brisbane, at some point in the next month I will be driving up and will be coming back with parts to Sydney so can move down large items if the need arises.

I'm not presently in a position to dispatch these items straight away, however once there is enough interest I will go up and get them on their way. I don't have any pictures at present, but once I'm up there can take some.

The below prices have some wriggle room, but no crazy low ball offers please.

(A) UAS X Pipe, 2.5" in/out, in brand new and unused condition, its external appearance is shiny (not plain bright mild steel, which was the cheaper version) Asking 450

(B) Magna Flow Mufflers (pair) 2.5" input the are single tip, hot dog style new and unused: Asking 400 for the pair

(C) Metal Cat 100 Cell Catalytic Converters (pair), 3.0" input and 2.5" output, in new and unused condition: Asking 400 for the pair

(D) OEM 2000 spec rear centre and rear taillights, new unused condition, have the sealant they come with: Asking 400 for the set (note my memory regarding the centre panel isn't 100% pretty sure I bought the set, price to be adjusted if this isn't the case)

(E) OEM 3rd Light Infill Panel, New and unused in box, not broken in anyway: Asking 300

(F) Twinz 2+2 Rear Bar, new and unused: Asking 500

(G) UAS strut braces, New and unused (front and read) polished aluminium: Asking 250 for the pair

(H) White line solid front and read sway bars, Installed but not used: Asking 250 the pair

(I) Nismo Purple top 555 injectors, flow tested and are spot on, Installed but not used: Asking 750 for the set

(J) FMIC and piping, Manufactured by ASE, very solid and quality: Asking 500

(K) Used OEM AFM's relatively unmolested (2 units) Asking 80 each

(L) OEM velour interior and seats (2+2, gray in colour) is immaculate with the exception of one panel where the previous owner mounted a fire extinguished (two holes to hold the bracket on) Asking 400

(M) Garret 28R Turbochargers (pair), Installed and never used, come with braided water lines and braided oil line, have both hard and soft pipes for oil return to the pan: Asking 2200

(N) AMS Hi Flow Manifold set, installed and never used: Asking 350

(O) Genuine Stillen Side Skirts in URATHANE for 2+2, never installed as new, have infill door panels that have been installed/painted: Asking 500

(P) Genuine Chilli Brace, installed, never used as new: Asking 60

(Q) Gas Struts for Bonnet, Installed but as used, Asking 80

(R) Rebuilt Long Block, Work done by Rollin (Niall) using Eagle Conrods, Wiseco Pistons, new OEM bearings, new seals, new water pump, new oil pump, new OEM knock sensor and harness, Arp head bolts, heads striped down and reconditioned prior to assembly: Asking 3500

(S) AMS oil cooler, installed, never used: Asking 100

(T) UAS powdercoated air guide (colour is silver) Asking 80

(U) NA 5 Speed Gearbox Used (modified to suit TT engine), comes with New UAS Braided one piece clutch line, New Master and Slave Cylinder, New Nismo mount, Used Cross Member, New Thrust Bearing, New Chromemoly Pivot, Used (5000 km) Heavy Duty Clutch maid by Exedy, New Engine/Transmission Bolts, Used Pedal set, will supply with Redline Fluid and a rear seal: Asking 1500 note, I have misplaced the manual transmission harness that connects to the main engine loom, will try and locate, its used.

(V) R32/R33 Brembo Calipers Used front and read (have 2 sets) Calipers are awaiting sandblasting so they can be powder coated, clear coated and reassembled, come with genuine rebuild kit (Reason for not doing this work is to allow the purchaser to choose the colour that matches their car) Asking 1100 per set (not am missing one maybe two pins, which can be machined or bought)

(W) Gredy Electronic Boost Controller, New, Opened and Unused: Asking 250

(X) Genuine OEM US (LHD) wiring harness to suit a manual box: Asking 350

(Y) Genuine OEM 2000 spec (series 4) smoked front indicator lights: Asking 100

(Z) Nismo clear side indicator lights, Asking 70

(1) AGX adjustable shows with Eibach Springs, assembled and installed, never used: Asking 600

(2) Rebuild NA rear cradle, new NA bearings, new hand Brake Shoes, New Rotors, New bushings, Diff oil replaced with Redline, Traction/Camber arms replaced with new adjustable units, cant remember the brand but they aren't cheap rubbish ones, supplied by Caz. Asking 750

(3) NA one piece steel drive shaft, Used but good condition: Asking 300

(4) Rebuilt steering rack, not used since rebuild, the rebuild cost 440 from memory, Asking 325

(5) Rebuilt Alternator, all oil/grease build up removed, new bearings, new bushes, as close to new as possible with out being new: Asking 120

(6) Gauge/Dial Inserts with resist to adjust cluster, white face: Asking 75

(7) Toy Z divorced 5 bolt dump pipes, installed not used, Asking 300

(8) OEM TT ECU Manual with Nistune installed, have purchased licence which can be transferred over: Asking 450

 

how come you are selling up?

 

Pm sent re side skirts

 

NA Drive Shaft

The drive shaft is for an MT 2+2? if so I might be interested pending postage cost to QLD 4304

cheers
FireHorse

 

Ill take the chilli brace posted to 3199 if its still there. Pm mevyour details and ill arrange cash straighr away.
Cheers

 

I'll take the sway bars! I'll pm you

 

I'll put dibs on this " (Y) Genuine OEM 2000 spec (series 4) smoked front indicator lights: Asking 100 "

Also dibs on this " (5) Rebuilt Alternator, all oil/grease build up removed, new bearings, new bushes, as close to new as possible with out being new: Asking 120 "

 

Maths and Time

No time to get the job done, car worth more in parts than completed not to mention to get it completed will take more cash.

I am in the process of importing a Cube from Japan as I have contacts there now who buy at auction, from car yards, yahoo auction (where every) for me, take care of all the details on the Japan side (degas, export cert, delivery to port, etc)

The car is for the wife however now I know the process and how much can be saved will more than likely get a V35 Skyline for 8-10 K landed and complied sometime in the future.

Sure its not as much an out and out performance machine like the zed, however they are not a slugs, 13-15 years younger, bit more refined/classy, got fours seats that can be used comfortable unlike a 2+2 which is cramped as hell back there. Will have limited mods, pod, exhaust, wheels, coilovers

 

Sure is!

Its for a manual, Manual NA 5 speed back to a NA diff. 2+2

Your near Ipswich so could probably drop off on my way south (as mentioned in my post)

 

Will let you know

Got another interested party in before you, not sure if its 100% though.

 

No problems

Will deliver as your in Redcliffe... just up the road

 

Pipped at the post

Rob,

Just beaten by a pm...

 

in the sway bars or the chilli brace?

 

Always miss the **** 2k tails oh well i'll have to be quicker next time.

 

AMS Manifolds

(N) Dibs on AMS Manifolds. PM Sent

 

Did my pm work or just havent replied? Was keen to pick up today am driving through sydney this arvo

 

2nd dibs on tailshaft if first falls through.

 

NOTE: These parts are presently 50 km North of Brisbane, at some point in the next month I will be driving up and will be coming back with parts to Sydney so can move down large items if the need arises.

So i guess you won't have much hope of doing a pickup this afternoon old chap.

 

Update #1

All,

Ryzan: 2K Tails and Manifold (Confirmed) awaiting response on a Turbo/Manis/Dump combo deal!

Scottyoz1962: Alternator and Front Indicators (confirmed)

Firehorse: Drive Shaft (Confirmed)

Newz: Sway bars (confirmed)

Shineyzx: UAS strut bars (confirmed)

ZX301: Side Skirts, Bonnet Strut and Chili Brace (as per agreed Pm price, confirmed)

Toy Z: Oil cooler (confirmed) Requested info re Boost Control, info supplied (Profec B, black in colour)