Heaps of after market parts/parting car

Discussion in 'Car Parts for Sale or Wanted' started by newz, Oct 30, 2015.

  1. newz

    newz New Member

    Twin turbo engine with recent work: ($2500)
    Injectors seals replaced and ultrasonic clean
    Plenum cleaned and painted silver
    Cam covers cleaned and painted black
    Plenum pull

    has not been on the road since work below:
    OEM rear main seal
    OEM plenum basket
    NGK PFR6B-11B spark plugs
    OEM front main seal
    OEM cam seals
    OEM water pump
    OEM thermostat
    OEM coolant bypass hoses
    OEM VTC springs
    OEM timing belt tensioner
    OEM timing belt
    OEM Idler pulleys
    Ramey Heavy duty idler studs
    OEM crank cover plates
    OEM crank sprocket
    Gates belts
    Wiring specialties premium detonation sensor harness
    OEM Knock sensor

    Still to be fitted:

    OEM oil filter
    Greddy magnetic drain plug
    Needs oil (has been drained)


    HKS Silent power dumpback stainless exhaust ? single muffler (sounds fantastic) $700

    Inlaid empire one piece steel driveshaft, estimated 2,000km on it $350
    Carbing chromoly front strut bar, has been paint stripped and primed, was planning to powdercoat so finish not the best. (best strut bar ever for the zed) $200


    Powertrix rear strut bar aluminium powdercoated $200


    HICAS Lockout bar $60


    TT differential $200


    TT gearbox good condition $700


    Extreme 5 puck button clutch (new in box) $450


    Chromoly lightweight flywheel good condition $350


    Work autostrada monza 3 piece wheels 17x9, 17x8 very good condition, no rash $700


    Tommy Kaira steering wheel with boss kit very good condition, period specific steering wheel $300


    Ecu talk blue screen $200


    Nistuned ecu $350


    500cc injectors $300


    Short shifter $70


    Tommy kaira Recaro SR3 with Bride rails x 2 mint condition $1800


    Black leather rear seats mint condition $150


    Altai rear centre panel blue (non genuine) $180


    Shagpile floor mats front and rear mint condition $200


    Tension rods $50


    Powertrix sport/street coilovers (5,000km) $700


    Chilli brake master cylinder brace $50


    Front mount intercooler $250


    HKS SSQV blow off valves x 2 genuine $300


    PWR twin pass radiator, best radiator money can buy $500


    Clear side nismo front indicators $60


    Rear orange/red tail lights $80


    JDM door cars black dyed trim good condition $150


    Stereo/head unit surround mint condition $80


    Greddy profec E-01 electronic boost controller $250



    Near new wiring loom, all plugs are perfect, zero corrosion $350


    Whiteline front and rear sway bar, installed on the car and maybe travelled 500km. $350



    CZP upgraded heavy duty clutch fork kit, chromoly pivot ball and fork boot $100

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. MikeZ32

    MikeZ32 das Über member

    DIBS on the tommy kaira cluster. PM Sent.
     
  3. newz

    newz New Member

    Sorry man TK cluster is already sold.
     
  4. pmac

    pmac Z,, IT'S COMPLICATED!!!!!

    Why are you parting out what could be an awesome car?
     
  5. gmbrezzo

    gmbrezzo Moderator

    dibs on Altai rear centre panel blue (non genuine) $180
     
  6. SrAfciGeR

    SrAfciGeR Member

    Hi Mate would you have HICAS Lockout bar pic ?

    Thanks
     
  7. GWZED

    GWZED 97 2+2 TT Targa

    Im keen on the chilli brace posted to 3199.
     
  8. Sketchy

    Sketchy Sick to the power of rad

    Interested on a package deal for the Nistune ECU, ecutalk and injectors. PM incoming.
     
  9. aanorton

    aanorton Z's = Engineering+beauty

    Do you still have the black leather rear seat
     
  10. newz

    newz New Member

    Leather rear seats still here mate
     
  11. newz

    newz New Member

    HKS Silent power dumpback stainless exhaust single muffler (sounds fantastic) $700

    Carbing chromoly front strut bar, has been paint stripped and primed, was planning to powdercoat so finish not the best. (best strut bar ever for the zed) $200

    Powertrix rear strut bar aluminium powdercoated (And vinyl wrapped)$200

    HICAS Lockout bar $60

    TT differential $200

    TT gearbox good condition $700

    Extreme 5 puck button clutch (new in box) $450

    Chromoly lightweight flywheel good condition $350

    Work autostrada monza 3 piece wheels 17x9, 17x8 very good condition, no rash $700

    Ecu talk blue screen $200

    Nistuned ecu $350

    550cc injectors $300

    Short shifter $70

    Black leather rear seats mint condition $150

    Shagpile floor mats front and rear mint condition $200

    Tension rods $50

    Powertrix sport/street coilovers Come with brand new front mounting cups, the ones with brake line connecting tabs. These retail at over $1500 (5,000km or less on them) $850 (price was input incorrectly previously)

    Front mount intercooler all piping, couplers and clamps included $250

    HKS SSQV blow off valves x 2 genuine $300

    PWR twin pass radiator, best radiator money can buy $500

    Clear side nismo front indicators $60

    Rear orange/red tail lights $80

    JDM door cars black dyed trim good condition $150

    Stereo/head unit surround mint condition $80

    Greddy profec E-01 electronic boost controller $250

    Near new wiring loom, all plugs are perfect, zero corrosion $350

    Whiteline front and rear sway bar, installed on the car and maybe travelled 500km. $350
     
  12. aanorton

    aanorton Z's = Engineering+beauty

    dibs on rear seat
     
  13. aanorton

    aanorton Z's = Engineering+beauty

    Can you PM me with a photo of the rear seat and your details for payment
     
  14. newz

    newz New Member

    No worries mate, PM incoming.
     
  15. newz

    newz New Member

    Twin turbo engine with recent work: ($2500)
    Injectors seals replaced and ultrasonic clean
    Plenum cleaned and painted silver
    Cam covers cleaned and painted black
    Plenum pull

    has not been on the road since work below:
    OEM rear main seal
    OEM plenum basket
    NGK PFR6B-11B spark plugs
    OEM front main seal
    OEM cam seals
    OEM water pump
    OEM thermostat
    OEM coolant bypass hoses
    OEM VTC springs
    OEM timing belt tensioner
    OEM timing belt
    OEM Idler pulleys
    Ramey Heavy duty idler studs
    OEM crank cover plates
    OEM crank sprocket
    Gates belts
    Wiring specialties premium detonation sensor harness
    OEM Knock sensor

    Still to be fitted:

    OEM oil filter
    Needs oil (has been drained)


    HKS Silent power dumpback stainless exhaust ? single muffler (sounds fantastic) $700


    Carbing chromoly front strut bar, has been paint stripped and primed, was planning to powdercoat so finish not the best. (best strut bar ever for the zed) $200


    Powertrix rear strut bar aluminium powdercoated $200


    HICAS Lockout bar $60


    TT differential $200


    TT gearbox good condition $700


    Extreme 5 puck button clutch (new in box) $450


    Chromoly lightweight flywheel good condition $350


    Work autostrada monza 3 piece wheels 17x9, 17x8 very good condition, no rash $700

    Black leather rear seats mint condition $150


    Shagpile floor mats front and rear mint condition $200


    Tension rods $50


    Powertrix sport/street coilovers (5,000km) $700


    Front mount intercooler $250


    HKS SSQV blow off valves x 2 genuine $300


    PWR twin pass radiator, best radiator money can buy $500


    Rear orange/red tail lights $80


    JDM door cars black dyed trim good condition $150


    Stereo/head unit surround mint condition $80


    Greddy profec E-01 electronic boost controller $250



    Near new wiring loom, all plugs are perfect, zero corrosion $350


    Whiteline front and rear sway bar, installed on the car and maybe travelled 500km. $350



    CZP upgraded heavy duty clutch fork kit, chromoly pivot ball and fork boot $100
     
  16. Moses zx

    Moses zx Moses

    Interested in sway bars. Do you ever travel or know anyone traveling to vic ?
     
  17. Liam Flint

    Liam Flint New Member

    If Moses doesn't end up getting the sway bars, I will purchase. I'm located in sydney too
     
  18. Anti

    Anti 14.7 x 14.7 = 44.1

    I have a Whiteline front sway bar (the one you want in a rwd car) for sale for the other one of you.
     
  19. DanielS

    DanielS New Member

    Coilovers

    I'm interested in the Coilovers, do you still have them?
     
  20. Blacky

    Blacky New Member

    Would you have a good left hand side axle in good nick by any chance
     

Share This Page