hello guys, I'm going to install my kit on February with lost of others mods. But I know people who had bad experiences with the manifold breaking... So I've been told to reinforce it but don't know how to do. Does someone make it?
I looked into these quite heavily and found that in most cases it was nearly cheaper to get new thicker wall manis made up that to spend countless hours sleeving welding and bridging the Trust manis to prevent the dreading wall cracking. To strengthen them is quite an involved process and requires the wall thickness of the pipes to be built up usually by sleeving and welding slightly large pipes to the existing ones and then cross bracing the runners Hope this helps Jason
Look in here! http://sgpracing-store.stores.yahoo.net/sgpragrsttum.html Maybe these guys can give u some answers, will email them very shortly to see if they can modify the flange to make em fit my TD05H's...
Thats a top find Mike for shits sake I had nearly decided on either the JWT 700's or run the Garett GT3071R's with mike smith manis, seeing these babies are 1k USD thats an awesome buy and can have factory external gates What to do what to do and the nationals are drawing nearer every second.
Hehe well i say BUY THESE!! They look real strong and shouldn't crack as they claim, plus i believe they are a direct "bolt on" to the "normal" TD05-16G's that u were originally planning on going with, food for thought
Miksta. Check your Profile description.. Exactly the same as mine... Can it be that there is someone as good as me HAHHAHA Sorry for the hijack by the way. Tezza
He only has one capital in zed whereas you have three, whether thats cos your more extreme or he does not need the capitals to be more extreme is up to you guys to decide
Haha U thief!! I've had that since since you were allowed to change your title here, there should be a copy right on names hahahha, all good...