EOI: TTZ NA Headers??

Discussion in 'Group Buys' started by ZeDHeD, Sep 28, 2009.

Thread Status:
Not open for further replies.
  1. ZeDHeD

    ZeDHeD Well-Known Member

    Sure! .......just need to tee up a suitable time? I'm in Flemington though! Peter Black also has TTZ headers on his car & is down SE way? Might be worth sending him a PM?
     
  2. ZeDHeD

    ZeDHeD Well-Known Member

    UPDATE! bad news is manufacturing price has risen by 5% on these! :(
    Good news is we can still get them at the old GB price of $580 gst inc for a STANDARD finished set! :zlove::zlove::zlove:......because despite what people say Simon at TTZ is actually a good guy & said he will just absorb the increased cost for us! ;)......so essentially you are all getting a further 5% discount! :D

    Extra $245 gst inc if you want HPC?

    BUT.......& it's a biggie!

    Order MUST be placed BEFORE mid November!!!!!!!
    otherwise with XMAS & NY we won't be able to get the order filled until Feb 2010! :eek:

    If we get the order in before the deadline we are looking at a 3-4week manufacturing time!.......plus an extra week or so if you want them sent off to HPC??.......so a great Xmas pressie for your Z! ;)

    I'll post an 'offical' GB thread as soon as I get back from interstate early next week so we can get moving on this!

    50% NON REFUNDABLE deposit will be needed from 6 buyers BEFORE we can place the order!!

    So be ready to go with those deposit payments so we don't miss the cut off!
    Balance will then need to be paid prior to delivery!

    CheerZ
    Russ :)
     
    Last edited: Oct 2, 2009
  3. mr zed x

    mr zed x chassis scrubbin..

    sounds good to me.

    yeah may hvae to get cooking listening to zeds.

    and evan you have dual 3" exhaust, wouldnt that be bad for the zed? N/A's need a certain amount of back pressure, i heard you shouldnt go above 2.5"..

    keen on hearing it... although i ripped my zed through the new eastlink when it was on standstill, and creemed. the sound was amazing plus i had a guy pull up and tell me so haha...

    dont know if i want extractors on it haha
     
  4. just-zed

    just-zed zed lives long live the z

    done deal - can't wait
     
  5. ZXDEVIL

    ZXDEVIL Active Member

    What sort of system do you have atm?
     
  6. sandeep

    sandeep Active Member

    Have you heard my Zed? Maybe I'll come to the next cruise and you can have a listen. I don't think I noticed a huge difference in the exhaust note after the headers were put on, you can hear the pulses more but it didn't make huge difference to the sound from the mufflers. You will hear a bit more engine noise though, especially when you load up the engine. Get the HPC coating if you can afford it.


     
  7. mr zed x

    mr zed x chassis scrubbin..

    when we did my under carriage replacement i had 2.5 " piping (i measured) from an adapter on the extractors all the way back. i think the adapter made the piping go from 2.25" standard extractors to 2.5" new pipes.
    after market cats, but no idea of brand and ford XR8 muffles and tips.
    which all come with teh car when i brought it.

    sounds awesome anyways.
    but i have a ordered a set of magnaflow 14862 mufflers. and im getting 2.5 " mandrel bent, as the pipes on the car are press bent with magnaflow cats.
    now im wondering if its worth getting extractors..

    i did hear your zed, but you have the UAS resonator yeah?
    still sounded mean, but a little quiet? i heard you and mike had the same set up but his came out louder i dont know..?

    the HPC coating. what does that do ? longen the life of the extractors or reduce noise?

    the louder the better honestly for me.. as stupid as that sounds.. :drool:
     
  8. 300ZXC

    300ZXC #TEAMROB

    Increase life, doesn't make it as hot, so the fuel effic is better. a few other things, there's a link to the HPC website. Russ linked it earlier. Suss it out rob :p
    Cheers,
    Tom
     
  9. mr zed x

    mr zed x chassis scrubbin..

    ahhh mad, thanks tom.

    and your d is backward cuz. :p
    kindest regards,
    rod.
     
  10. 300ZXC

    300ZXC #TEAMROB

    my bad man :p
    I was preoccupied at the time of posting, had 50/50 of getting it right roD :D
     
  11. mr zed x

    mr zed x chassis scrubbin..

    hahaha all good tod.

    :D:D:D
     
  12. 300ZXC

    300ZXC #TEAMROB

    I see what you did there... tricky :p
     
  13. Zxryan

    Zxryan New Member

    im in for ttz headers, i put an order in like a few weeks ago and they havn't done anything bout it.
     
  14. mr zed x

    mr zed x chassis scrubbin..

    LOL

    bro people have had orders for a year.
    they are non existant :diespam:
     
  15. Gazza

    Gazza Active Member

    Count me in, I'll have a set please:)
     
  16. Zxryan

    Zxryan New Member

    i got a bunch off stuff off them a while back.
    it would have been useful to get some stuff i need of them
     
  17. ZeDHeD

    ZeDHeD Well-Known Member

    OK I'm back from interstate & will get the official Round 3 GB info posted up ASAP!........hopefully later tonight!
     
  18. just-zed

    just-zed zed lives long live the z

    how much longer ? very keen
     
  19. ZeDHeD

    ZeDHeD Well-Known Member

    Hopefully I'll get the official thread posted up later tonight!
    i was hoping to get this done the other day but I'm just waiting on confirmed HPC & gasket pricing & I'm expecting to have this info sometime today!
     
  20. ZeDHeD

    ZeDHeD Well-Known Member

    Sorry for the hold-up!

    but I've just noticed that TTZ have headers on their website at only $490 for a standard set??????......so just trying to sort out pricing as I have been told they were $580?? Hang in there while I get to the bottom of this?.......hopefully it will be worthwhile if we can get that same price?? ;)
     
Thread Status:
Not open for further replies.

Share This Page