got mine today, mounted on the dash with some 3M dual lock as per below, non intrusive and easy to remove....only problem is my left click button is like 90% depressed and is a bit finicky to work, does anyone else have this problem?? might have to contact Peter about it and see what he says.
sometimes of the holes for the buttons on the case are bit small and this might cause the buttons to catch. try a touch of oil around edge of button and see if that helps. button hole might just need to be drilled out another mm if that doesnt help. could try it yourself (case just sockets together) or return it to be done.
ok, I might try have a look at it, I dont want to break the case, so by socket together do you mean it just pulls apart front from back and then clicks back into palce??
yeah its just two U pieces that socket together. no glue. case is very strong/sturdy, would be extremely difficult to break so dont worry about being too cautious. use fingernails and/or little screwdriver etc, might be a bit difficult but doable. ive done it with fingernails myself. putting it back together just place the lcd bit into the front piece so buttons go through holes etc and then spread the back piece over it and socket it in etc. takes a bit of effort/finger strength
Hey mate, I had a shot but its clipped in pretty securely id rather not risk breaking it or scratching the case up after spending $250 on it and only receiving it the other day. Here is a picture of it below, the button is basically jamming up every now and then (but always stays depressed as per the picture)..... id rather send it back and let you do the right thing and fix it, do you mind PM'ing me and letting me know how we can sort this out? Cheers, Chris
