Dash peeling up

Discussion in 'Technical' started by joseph, Dec 16, 2018.

  1. joseph

    joseph Member

    hey guys,so my dash is peeling up near the main vents,at the top of the dash anyone know what I can do about it any tips or tricks also if someone could maybe help me out I’m wanting to make more friends in the zed community.
    Thanks guys
     
  2. rob260

    rob260 Administrator Staff Member

    Glue it back down.

    Use a two part epoxy -do not use sikaflex 227 as it will get soft in the sun and start to lift again.

    Pull the vents out, get a bunch of epoxy on your finger and just jam it in there. Use a pool noodle wedged in between the glass and the dash to hold it down while it dries.

    Use masking tape and newspaper, plastic sheet etc to make sure you don’t get epoxy anywhere except where you want it...
     
  3. MagicMike

    MagicMike Moderator Staff Member

    Pretty much as Rob says.

    Or do it next time you want to pull the dash out.
     
  4. joseph

    joseph Member

    I’ll definetly try that out,the top of the dash has gone hard though due to being in the sun any ideas on how to soften it before applying the epoxy ?
     
  5. rob260

    rob260 Administrator Staff Member

    Hairdryer -carefully
     
  6. Shane001

    Shane001 Well-Known Member

    Or leave it in the sun for half an hour first to soften it up
     

Share This Page