BLACK BEAST BUILD Slicktop R-Spec

Discussion in 'Member's Garage' started by BLACK BEAST, Feb 22, 2010.

  1. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    I'm running mike smith manis .. but no don't match port the exhaust side just gasket match... .(In theory the lip may help with reversion )..


    I'm running 1mm over size ...first page of the build was the proposed old motor specs.


    .
     
  2. qld_ame

    qld_ame New Member

    Messages:
    24
    Likes Received:
    0
    Trophy Points:
    0
    interesting, building very similar to engine spec except running rm5 solid cams, doing away with the hydraulic lifters and going for adjustable cams. by no means building a drag car, but something that has a bit of top end power(600rwhp). in theory porting the head would yield the same outcome of putting over sized valves and cam, but with retaining the max velocity. obviously doing all three(cams, valves and porting) would achieve the best result. Only draw back to my build is costs. getting heads p&p is not cheep, thus going for bolt ons was the better option. also on that same note there are quite a few cars in the states which use only bolt ons and are achieving 5-600rwhp. to keep everything iv done simple, iv over engineered the engine so it dosent go bang when i race it down the quarter mile.

    After everything iv basically decided to go with a basic port to increase velocity as much as possible and gasket match the exhaust manifold. just wasent too sure on the specifics of how far everyone goes.

    love the build, will put alot of envy on other import drivers.
     
  3. Jamie

    Jamie Jamie The Hobbit

    Messages:
    2,248
    Likes Received:
    3
    Trophy Points:
    38
    Dyno's in the state read about 200hp more than what they will here lol
     
  4. ProckyZ89

    ProckyZ89 Senior Member

    Messages:
    3,036
    Likes Received:
    23
    Trophy Points:
    38
    200hp- 10-15% same same,

    R5 cams will be laggy

    Best bet, look over the Australian builds DO NOT base them off American results of you'll be disappointed ,
    PS his engine is a freak (in a good way) GL getting similar haha :p
     
  5. UNIQUE ZED

    UNIQUE ZED Zed Racing World

    Messages:
    2,220
    Likes Received:
    53
    Trophy Points:
    48
  6. mijake

    mijake Member

    Messages:
    311
    Likes Received:
    0
    Trophy Points:
    16
    Well done Rob, the car is going from strength to strength with each set back! My hat comes off to you with your dedication and the patience has definitely been worth it. :br:[TIS]:bow2:
     
  7. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    Thanks sweetheart .... just hang on :br:


    .
     
  8. kickerzx

    kickerzx Member

    Messages:
    222
    Likes Received:
    7
    Trophy Points:
    18
    Your tires are on the wrong way..
    Otherwise, way to go man!
     
  9. ed300zx

    ed300zx Active Member

    Messages:
    3,661
    Likes Received:
    5
    Trophy Points:
    38
    So if we use the 15% rule, your engine is making around 900hp (670kw)?

    Unreal!
     
  10. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    Thanks .....Definitely been a long road
     
  11. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    Front wheels were thrown on in a hurry for dyno :p

    .
     
  12. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    pretty much ..
    I've seen it estimated around 15 -18% with the Z.

    Also the UAS dynodynamics shootout 6 reads lower than the newer dynodynamics shootout 6F as they are set at different ramp rates.
    Ben played around at lower boost close to but still not at the ramp rate of 6F while tuning and there was about 15rwkw difference just under 500rwkw.
    .
     
    Last edited: Oct 1, 2015
  13. UNIQUE ZED

    UNIQUE ZED Zed Racing World

    Messages:
    2,220
    Likes Received:
    53
    Trophy Points:
    48
    Amazing build, awesome result. This is the biggest HP car we have ever had on our dyno. MPH at the drags will be the real test to compare.
     
  14. Shane001

    Shane001 Well-Known Member

    Messages:
    1,840
    Likes Received:
    41
    Trophy Points:
    48
    Suggest showdown: Slotcar vs Black Beast at WSID :br:
     
  15. Fists

    Fists Well-Known Member

    Messages:
    1,453
    Likes Received:
    34
    Trophy Points:
    48
    So did you ever get the PPG gears in or are you still running this through a stock box?

    Also, thanks for the replies to all my questions, no thanks button in here and I never want to dilute your thread with content-less posts :br:
     
  16. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63

    No probs


    Funny enough I was just going on about the strength of the stock box and....

    BOOM !

    No more 3rd gear :bash:

    I gave it beating in 3rd and 4th at 18psi close to 450rwkw for a while
    then tried 22psi just under 500rwkw which became a little hairy without the rear wing on (but my Girl Friend seemed to like it :p)

    3rd gear with traction... box couldn't handle it ...too much torque.
    but it was a tired noisy box .


    PPG now .
    .
    .
     
  17. SIM300

    SIM300 FAKE MODERAT0R

    Messages:
    5,058
    Likes Received:
    15
    Trophy Points:
    38
    Congrats on the build, Rob.
    I'm a picture guy and would love to see a proper shoot before something else brakes!
    Make it happen ;)
     
  18. UNIQUE ZED

    UNIQUE ZED Zed Racing World

    Messages:
    2,220
    Likes Received:
    53
    Trophy Points:
    48
    I know I would lose highest mph at least.
     
  19. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Messages:
    4,062
    Likes Received:
    115
    Trophy Points:
    63
    Haven't had a chance ..but will do
    Managed a couple of indoor pics as it was raining before cam snapped... And now box :rolleyes2:





    [​IMG]

    .


    And MY BEAUTY WITH MY BEAST


    [​IMG]
     
  20. SIM300

    SIM300 FAKE MODERAT0R

    Messages:
    5,058
    Likes Received:
    15
    Trophy Points:
    38
    But I've already seen those haha. Need to get some with the wing on... with that power, I'd just be leaving it on :)
     

Share This Page