AUS Apexi Power FC D-Jetro, MAP sensors, Hand Controller/Commander, Suit Z32

Discussion in 'Car Parts for Sale or Wanted' started by rob260, Jul 25, 2011.

Thread Status:
Not open for further replies.
Page 1 of 2
  1. rob260

    rob260 Administrator Staff Member

    Hey Guys, putting my Power FC D-Jetro up for sale. This was used in my rebuild and would suit someone else wanting to go to MAP style ECU. This unit has come straight out of my car and is ready for use with Z32. "The Power FC is a complete, stand alone, total engine management system capable of handling virtually anything thrown in its path." - www.apexi-usa.com

    • Eliminates need for AFM allowing dual intakes
    • Allows 20x20 mapping
    • Warning functions for knock and injector values
    • Currently tuned for Nismo 740 injectors

    The ECU itself is ready to plug in, as are the MAP sensors and wiring assosciated harness. The twin map sensors include T piece etc for use with Nissan VG30DETT. The Power FC also supports twin knock sensors for anyone who has a second sensor installed.

    [​IMG]

    [​IMG]

    Asking price includes the Hand Controller/Commander unit. The hand controller is very user friendly and can be configured to display the following:

    InjDuty - Injector Duty / How busy the injectors are
    IgnTmng - Ignition Timing - Camshaft timing
    AirFlow - Airflow meter voltage
    PimVolt - Map Sensor voltage
    Eng Rev - Engine revs
    Speed - Road speed
    Boost - Boost Pressure (requires optional boost kit fitted)
    Knock - Knock sensor reading
    WtrTemp - Water temperature or engine temperature
    AirTemp - Air inlet temperature
    BatVolt - Battery voltage

    It also records maximum readings, so you can review max water temps/injector cycle/air inlet temps/knock numbers etc after a drive. I have found this feature particularly useful.


    VTC is controlled via a Greddy multi switching unit, which is also included in the price. The Greddy is a two channel arming switch, so with one channel running VTC you have an optional second output for thermofan, sprayers, what have you! The Switching unit wires directly into the ECU and can switch based on settings on one to three paramters. It can also function as an alarm/warning unit. All wiring is included.

    [​IMG]

    All care was taken when removing this from the vehicle to make setup and installation as easy as possible for the next user; wiring has been left intact and the only splicing required will be for the Greddy switching unit. This really is a good ECU for anyone wanting to exceed the limits of Nistune, I am only selling as it doesn't quite tick all my boxes anymore.

    Condition: As new, ready to plug in.
    Price: $1800 delivered, the lot. Make an offer if you are genuinely interested but feel this is too steep.
    Location: Sydney (North)

    PM any enquiries.
     
    rob260, Jul 25, 2011
    #1
  2. Watto

    Watto New Member

    i had one of these in my R33.. they are awesome !
    for anyone after a serious ecu with a user friendly ui this is it.
    you can tune the whole car just off the hand controller if you
    really wanted to.

    omg i wish i had the cash.. well worth it ;)
     
    Watto, Jul 25, 2011
    #2
  3. ezzupturbo

    ezzupturbo JDMAutomotive

    awesome price for a awesome ecu had d-jetro on my sr in my escort was all tuned from hand controller easy and fast.
     
    ezzupturbo, Jul 25, 2011
    #3
  4. rob260

    rob260 Administrator Staff Member

    More Info

    Some more info...

    The Power FC can also run four stage boost control if used with the Power FC Boost Control kit (not included). A quick search shows the correct apexi boost control kit to cost around $400 -so similar in price to Profec B or other quality external EBC.
     
    rob260, Jul 26, 2011
    #4
  5. Big_al_TT92ZX

    Big_al_TT92ZX Tempted to own another Z

    Great ECU, no issues with cold starts etc. as far as I know and it's really easy to find a Tuner who knows the Power FC inside out. :)
     
    Big_al_TT92ZX, Jul 26, 2011
    #5
  6. mattyj

    mattyj New Member

    might find it a bit hard to sell considering the vipec v88 can be had for similar money. good luck however, very user friendly ecu :)
     
    mattyj, Jul 26, 2011
    #6
  7. rob260

    rob260 Administrator Staff Member

    Hi, yeah I am familiar with the Vipec -there's one in my car at the moment :D Great ECU and very versatile, but nowhere near as user friendly as the Power FC. The Vipec has taken literally days to setup and tune, whereas the Power FC is literally a case of plug in the harness, connect the vaccum hose for map sensors, and drive to your local dyno for fine tuning.

    The hand controller is a nice feature too. The equivelent digi display from Link (Vipec) adds a cool $900+ to the price tag!
     
    rob260, Jul 26, 2011
    #7
  8. rob260

    rob260 Administrator Staff Member

    Free LED kit if sold by 10/8

    Yes you read correctly, I will throw in a free "full" LED kit with this ECU if it is sold by 10/8
     
    rob260, Jul 29, 2011
    #8
  9. Watto

    Watto New Member

    Hopefully it's someone else's kit & not mine ha ha ;)

    Maybe a stupid a question but I found a apexi power fc for a bullshit cheap price, it's off a sr20det.. Any chance this would work or be modified to work with a z32 ?
     
    Watto, Jul 30, 2011
    #9
  10. Chilledpain

    Chilledpain Z Reaper

    The many variants of the power FC are not designed to be straight plug and play with the Z32. Gotta change a few pins etc to be compatible. As far as I know, the power FC designed for some of the skylines can be modded to suit. I'm assuming that is what this unit is?

    http://www.aus300zx.com/forum/showthread.php?t=271413
     
    Last edited: Jul 30, 2011
    Chilledpain, Jul 30, 2011
    #10
  11. rob260

    rob260 Administrator Staff Member

    Don't think so dude sorry
     
    rob260, Jul 30, 2011
    #11
  12. rob260

    rob260 Administrator Staff Member

    You are right apexi don't make a plug in ecu for z32, UAS do their thing in house to adapt them. The previous slot car motor (prior to running VQ) used a power fc d-jetro too.

    Just to clarify the setup I have for sale is plug in for 300zx and comes loaded with a z32 nismo 740 tune.
     
    rob260, Jul 30, 2011
    #12
  13. d3c0y

    d3c0y Member

    Out of interest why are you changing computers?
     
    d3c0y, Jul 30, 2011
    #13
  14. ezzupturbo

    ezzupturbo JDMAutomotive

    Vipec has many more inputs and outputs and better resolution in its maps
     
    ezzupturbo, Jul 30, 2011
    #14
  15. rob260

    rob260 Administrator Staff Member

    Spot on.

    The Power FC has been great; very user (and tuner) friendly, handles bucketloads of power, and maintains good startup and dribeability.

    But yeah I want some more flexibility in terms of inputs and outputs than the power FC can deliver.
     
    rob260, Jul 30, 2011
    #15
  16. ezzupturbo

    ezzupturbo JDMAutomotive

    its one of the reasons im running a sm4 so many inputs and heaps of options
     
    ezzupturbo, Jul 30, 2011
    #16
  17. rob260

    rob260 Administrator Staff Member

    Price Reduced

    Price reduced to $1500 for the lot.
     
    rob260, Aug 5, 2011
    #17
  18. rob260

    rob260 Administrator Staff Member

    Still for sale -don't bother offering less than $1k though...
     
    rob260, Aug 14, 2011
    #18
  19. Tektrader

    Tektrader Z32 Hoe, service me baby

    If I was going to continue developing my road car Rob, it would have been sold already.

    Why dont you just keep it? I cant beleive the Haltech ( or any other aftermarket ECU's will be that much better.
     
    Tektrader, Aug 14, 2011
    #19
  20. Adamness

    Adamness Active Member

    Oi Gargoyle..buy this!
     
    Adamness, Aug 14, 2011
    #20
Page 1 of 2
Thread Status:
Not open for further replies.

Share This Page