I have an 89 car with paint code 732 (black) I also have a 90 car with paint code KH2 (also black) I bet the pearl has been altered or black is...
I want to buy a new rear bumper facia for my 89 2 seater Coz wants $302 US dollars and I have sent for a freight quote Is there someone I can...
I had a pre roadworthy check done on my 300 (Z32) They came back with non standard FUCA and RUCA - they are adjustables Non standard Seats...
Can Nistune display and do everything that Ecutalk does
At the moment the wiring comes thru the gearshift boot and drapes down past and rubs on the tailshaft - from there they go to the clips on the...
Hi there My new (to me) Z arrived with the ABS wire drapped around the front shocker the sensor is bolted in tight - then it goes 100-150mm up...
Forum post in 2008 says the Aus vin will be something like "6U90000GZ32XXXXXX". The Jap vin will be the same but without the "6U90000" so it'll...
N good luck trying to extract it from the combined Z31 Z32 tech forum 32,440 threads - ready set go
For most of the long time members you have - like me noticed the decline of ppl using the forums - 447 ppl at one time back in 2011 and nowhere...
Have seen these ages ago - go to the 3rd picture down - http://www.volvoforums.org.uk/showthread.php?t=17006 I think S60 maybe 740 Volvo and...
Hi all - I have seen a few ppl with broken R200 diffs on this forum Is there a common thing in NA R200 diff that breaks Is it axles - teeth...
http://www.youtube.com/watch?v=tx-WyIPeuHM&feature=plcp Thanks in advance
From the FSM VCT operates with input from Engine Coolant - assume if not up to temp - VCT inop Engine RPM - some are saying 1800 rpm to 4500 rpm...
Does anyone know the inside diameter of a std TT exhaust manifold (bit that bolts to the head) or one after it has been extrude honed please cheers
What it says Want to get mine fixed - its out of the car Thanks
NA Clutch pressure plate 240 x 160 x 3.5 and 580 kg clamp load TT 250 x 160 x 3.5 and 800 kg clamp load Pathfinder...
I want to buy some Injectors and I know about Ohms (10-14) for a 300zx Ohms is the resistance but what is Impedance and do I have to worry about...
Are these crimped onto the hub Cant see how I can get them off Thanks
If I swap from side to top feed injectors - so long as they are 10-12 ohms resistance will they work ?? And yes the fuel rails are different...
I am doing a NA to TT conversion along with turbo and injector upgrade so the NA pump will not keep up A new TT pump from Coz is $300 plus...
Separate names with a comma.