$80.00 Posted. Software CD includes Nissan Datascan 1.4 & ConZult Free version, as well as some other Zed documentation (such as online owners...
RE: Blazt cable Thanks for your interest guys. The item has been sold
$79.00 Posted. Software CD includes Nissan Datascan 1.4 & ConZult Free version, as well as some other Zed bits and pieces.
No haven't had a compression test done. Does uneven compression only show when the engine is cold?
AFM was one of my first thoughts, but this was cleaned/inspected when I added my pod filter. Throttle bodies were also cleaned out at this time...
About a year and a half ago
hey Guys, Have always had a problem with my zed when cold. For the first 2-3mins of driving she will be very rough i.e. hestition, surging etc...
Should be the smaller metal box located under/behind the ECU :zlove:
ECU? Hi, After the ECU and/or Power Steering Control Unit (PSCU) if you still have em? :) :)
I should say, mine is N/A :zlove:
Hi Guys Doing a Under-Plenum Hose bypass at the moment. Just wondering, where does the coolant route to after it leaves from the back of the...
Thanks for the replies. My Car is NA so no chance of blown turbo seals. I recently did a under plenum hose bypass on the drivers side to cure a...
Hi Everyone, I am getting white smoke out of my exhausts under throttle (after the car is warm). I suspect it could be a leakly head gasket,...
Hoses to be linked? Managed to find a picture of the under plenum hoses [IMG] My Leak is coming from the hose in the blue circle. I have tried...
Hi Guys, Have a leak in on of the coolant hoses under the plenum. For now, I like to bypass the water hoses under the plenum without having to...
Just as a subquestion. Does anyone know if z32 Turbo driveshafts can be used in NA's and same with auto driveshafts in manuals.. do they all use...
That could definately be a possibility. My old clutch was really worn. So possibility a uni joint problem? Are they serviceable or...
Hi, I recently had a new clutch put in, and I am now getting a shudder or knocking under load (up to 4000rpm, then above is fine) mostly...
Hi All, Recently noticed some clutch slip in my N/A 5spd when I put the lead foot down in 2nd and 3rd, and its definately on its way out. Would...
Replaced my coolant a few days ago, however I left the overflow tank untouched/unchanged. The Overflow tank is very full - like much higher than...
Separate names with a comma.
