I do assume the Ls2 truck coils would be running much higher amperage than the stock z32 coils (which i think is no more than 15amps). I suppose...
Im wanting to setup a dedicated relay as fuel pressure at 40psi draws 12amps at 13.5 volts so i reckon its not going to take long to burn out the...
I wont be needing 30 amps of current for the fpcu to handle or to send to the fuel pump. Even if the oem fpcu can handle that much current i dont...
I just typed into the search bar 'fpcu' and cane back with 3,860 results, im gusseing these damn fpcu's are very troublesome and getting a new one...
I found the problem as to why i would be running good afr's sometimes then it would lean out way too much, i tried reducing the timing down to 1 -...
Seems like theres a disconnected or faulty earth wire on the body probably behind the dashboard somewhere. Could be a plug not connected behind...
Welcome to 300zx community, thats quite a nice example you have there
Yeah good point i guess, i would do the same
It would have to be a loose or disconnected earth wire from any or all the parts you explained in the post, that would defintly make alot of the...
I wouldnt be cutting anything off the block if you cant put it to use. If you absolutely had to remove it though i would just grind off the...
Thats probably the best thing to do on a 300zx - chopping off all the crap that dosen't need to be there but as long as the important stuff is...
I meant dipstick location for the non turbo vg30 found in the Fwd nissan maxima. Sorry for the confussion
Could be the engine oil dipstick location for a non turbo engine
Defintley, i agree. Im pretty new to the car tuning and modifying scene and very much a beginner, there are many many parts, data and even terms...
I can totally understand tuners not wanting to hand out they're tuning data to just anyone. Id happily pay a tuner to get the best results of...
The haltech i set at factory igniton timing. Ive increased it by 1 or 2 degrees over the whole igntion map but i think it might still have alot of...
Good idea with the haltech sensor, are there any haltech retailers in melbourne, 99% of everything for a performance car is in syd or qld. I got...
Ok thanks, anything over 5000rpm and 60kpa manifold pressure on the fuel maps ive set to 100%. From 4000rpm to 5000rpm in the same manifold...
Hi, im after some advice regarding correct injector dead time. I have a set of deatswerks 740cc injectors running at 60psi fuel pressure. The...
After ruling out possibilites of not getting enough fuel via the base map at high rpm i thought maybe even with bigger fuel pump and injectors,...
Separate names with a comma.