Bugger I thought I nailed it. My Z 100% wont start in neutral less the brakes are on quite hard. Inhibitor switch like others have...
Is your foot... ...on the brake? Mine will start in neutral only with the brakes applied.
Unfair He was treated very unfairly. The thing to remember is this. Legally speaking and it appears not many people realise this. When you...
5.4L? You sure you didn't mean 4.4L? Manual says 3 point something but I find 4.3 - 4.4 is about perfect with a regular sized filter.
I'm curious Do you use your heater a lot and have you used the same brand of coolant all these years? Don't think I've ever used my heater and...
Nothing wrong... ...with Mobil1. The 5w is no good, but my Z likes the 15w.
Sure If the crack/leak is in a water jacket right next to the exhaust port on cylinder two, it would dump coolant directly into the exhaust...
Over zealous porting... ...makes perfect sense. Dumping coolant straight into the turbo hence you're using tons of water when driving....
Have you checked? Boost leak or injector connectors are corroded?
Cracked head makes sense... under plenum coolant hoses is me grasping at straws, seriously doubt this can happen less there was massive corrosion.
Only other thing I can think of is the under plenum coolant hoses are somehow leaking... have never pulled a plenum so don't know if this is...
Could be... ...coolant leaking into the turbo I guess, but 200+ PSI in cylinder 1 makes me think this isn't the case. You could block the...
My initial thought... ...was that he tried to overtake him on the grass and timed the maneuver wrong.
heh Z was intentionally blocking him! :br:
Yup Full rebuild including stainless steel sleeve should only be about $150 Better then new.
Picture didn't load first time Swap that plug to the angled port closest to firewall. Those hard lines don't like being manipulated too much....
You will need to plug... ...one of the front ports on that BMC. Why not get yours rebuilt?
Things like A magnet wouldn't stick to the pipe, but was very strongly attracted to the flanges. They look really well welded, and they're at...
Try here http://www.australwright.com.au/ http://www.specialtymetals.com.au/
Think you will find These are all made in the same factory in China. Biggest issue with these is not so much the design or the welds, but the...
Separate names with a comma.