Double row sorry, Took a look inside.
Been so long since I purchased it.
The radiator is a double pass sorry not triple.
Diagnostics package: ECU Talk LCD , ecutalk USB, valve timing control tester, data logger for setting critical alarms like temps ect has 8...
What rubber and offsets are you running?
I'm surprised to hear you need to shorten the upper control most zeds would scrape when cornering.
A sonic cleaner can be purchased off eBay for sub $60. Pintle caps and orings are cheap as and pop in.
After cleaning install back in the rail,...
If its that easy why don't you seriously make a few. Send them out for testing.
3 versions later and a shit fight with RFI you might have...
Check your cas is about center on the bolts.
Take it out inspect the pin that drives it and be sure it is not snapped.
Turn cas by hand and...
Do you just want the dimensions of the rubber or the stock alloy leg it bolts to?
Type it like this without *.
Awww was hoping the title would be
"How a NewZealander turned a Nissan Mirca into a supercar"
You can change the liner in your mig, get a different bottle of gas and wire which will mig alloy just fine.
But it's more annoying than changing...
I expected it to be on the ecu pinout but no dice?
Always hated that a pressure tester semi relies on how cranking the engine exactly the same amount of times per cylinder and making sure the...
Most 93 here are still S1. Pretty rare to find a 93 S2 with electrics.
I guess with only 4 months left of that year.
Remove the LOWEST intercooler pipe on both sides and see if oil pours out...
Oh wait... NA? Probs rings :p
From Haltech online support.
No, the only options on the Pro are 360+6 (factory), or 12+1. We don't have any firmware for other...
I don't see what's wrong with parking it on your least favorite neighbours lawn, undo the drain and inspection and go to town on it with a...
Ah shit, well you know what they say if it's gonna get caught on something it'll get caught on everything!
Center bearings fine to use if you can.
Just hold it up with wire for now .
LUSHZX sorry :rofl:
Separate names with a comma.