And you have checked all the wiring in the engine bay to make sure you haven't crushed something putting the engine back in?
Are all the earths...
Nice we put a L76 into my mates crewman i think anything over 10 psi needs an intercooler under the blower unless your running a cooler fuel his...
Agree with Fists, Flush Bleed, and get a one piece line from the master to the slave cylinder that stops a lot of issues.
Yeah, I used a nut and bolt to fix the issue never had a problem since.
But it still looks ugly Sorry not a fan of the shape Like the wheels though o_O
Well go and try another ECU and TCM with a known working one and if the issue still there, Start the process of elimination.
Ok you need to go buy a consult cable and a dongle or go to someone who has one as you will see if the timing is out when you stick it in gear.
Go to the 5:06 minute mark and watch!!!
Maybe the IAC valve ??? As its not compensating for it being in gear??
I have a set of newly reconditioned 555cc Injectors for sale never used as i have gone bigger
$500 including post
Sounds like a dry joint in the green electrical board on the back of the cluster, Mine was doing 120 when idling in the driveway, Changed this and...
Yeah good call scotty !!!
Well judging on how mechanics charge your probably looking at $1000 that's with parts maybe more as most mechanics over here won't even look at a...
Check for a hole in the actual hard pipe itself and check if tight at the turbo.
Could try a block and tackle and see if you can pull it forward the 1cm
You have my permission to smash it with a hammer !!!!!
Yes commonly known as the Bastard hose!!!
Glad it went well
Well it's different I'll give them that but I wonder what the thought ptoproc was ......
i know where that blind mechanic is going to be
Separate names with a comma.