Z32 2+2 boot layout picture wanted

Discussion in 'Non Technical' started by NI85, Feb 15, 2022.

  1. NI85

    NI85 Active Member

    I bought a 2+2 recently and it is missing bits under the boot carpet.
    I would like a picture of a complete boot layout: of what's meant to be when lifting the carpet up.
    It would be appreciated, Thanks.

    Google searching, just gives me carpet choices or gutted boot images.
     
  2. MintZ32

    MintZ32 Active Member

  3. NI85

    NI85 Active Member

    Thanks , was hoping for a pretty colour photo. The part number image is fine too

    So I'm just missing the left compartment and its cover and belt sashes No cover for the scissor jack side?
    Does the left compartment hold anything specifically or is it just an empty compartment ?
     
  4. MintZ32

    MintZ32 Active Member

    The left compartment has always had my factory tool kit stored in it, but usually also stores the Targa top covers.
    I always thought I had a missing RHS cover and it bothered me but it appears that there was never one there?
     
  5. ADAMZX

    ADAMZX 2000spec Conversion

    If your interested mate, i have my old LH side grey foam tube i can sell you, if you need it. I replaced my old one with a later model white version (no difference other then the colour) for my build project and it is in very good condition. Send me a pm if your interested?
     
  6. MickW

    MickW Carntry member...

    I've got some pics of the boot furniture in my August 1989 JDM 2+2 TT auto Z32. Happy to upload them if you like, what year is your new purchase?
     
  7. NI85

    NI85 Active Member

    Pretty pictures of the boot furniture would be nice. My new Red purchase: according to a VIN list I have, puts it as "November 1989" JDM 2+2 TT auto Z32. A couple of plastic trim pieces are dated March 1989
     
  8. MintZ32

    MintZ32 Active Member

    Pinched these pics to get you some boot images.
     

    Attached Files:

    MickW and NI85 like this.
  9. ivan129

    ivan129 Active Member

    MintZ32, that's one clean zed
     
  10. MintZ32

    MintZ32 Active Member

    Not mine, but another well known Z owner in the community.
     
  11. MickW

    MickW Carntry member...

    Some of my booty pics from about 11 years ago, things have sagged a bit since then.
    I'm talking about those dreadfully thin OEM masonite panels.
    Went on a crusade to re-make them in marine plywood about 10 years ago, it's a WIP :)

    [​IMG]

    [​IMG]

    [​IMG]
     
  12. NI85

    NI85 Active Member

    Thanks for the pictures MintZ32 & MickW

    Regarding the Masonite. Mine have cracks. I had thought about replacing them with plywood.
    One of my 2+0 has MDF carpeted panels made (via a previous owner) The 2+0 has the benefit, in that the spare wheel and tool foam are counter sunk, allowing panels to sit flat on the floor.
     
    MickW likes this.

Share This Page