QLD QLD - 18 July 2015 - Mid year tech day at Ormeau

Discussion in 'Coming Events' started by oohogwash, Jun 11, 2015.

Thread Status:
Not open for further replies.
  1. alty

    alty New Member

    I'll be there, this time will try to come early and actually help!

    Can also bring some tools if given the heads up

    ]

    I may be able to seek us a server host that will do it all for free but it would require a lot of file moving, domain namechanges, dns changes blah blah blah
     
  2. Nasty_Girl

    Nasty_Girl Member

    I should be there!

    Anyone keen on doing a gearbox swap?? Bonez, Mikey, Al, Reek? - you know I love ya :p :zlove:
     
  3. ztoy

    ztoy Autospark Evolution


    Im keen if we can get a 3rd helper.
     
  4. scottyoz1962

    scottyoz1962 Active Member

    Unless the slavemasters i work for call me into work on that day, i should be able to make it, i'm happy to help the guys hold up the gearbox for you Ash.
     
  5. MagicMike

    MagicMike Moderator Staff Member

    Yeah i should be there
     
  6. graysonvario

    graysonvario New Member

    anyone on this day able to show me the ropes on a plenum pull?
    Wanting to swap over to my new polished plenum
     
  7. oohogwash

    oohogwash Member

    gearbox swap

    Ash - We have the transmission jack etc. Just make sure you have the tools, i might not have special tools... also last time i noticed they replaced main seal at same time, if folks have parts that may be required in case some replacements become obvious when the box is out.
     
  8. oohogwash

    oohogwash Member

    Lady Z's car

    It needs brakes bleeding, if anyone has larger front brake rotors we can use let me know.
    Also need to get all the gauges working in centre console.
     
  9. ztoy

    ztoy Autospark Evolution

    Ill have all the extra tools needed. I also have a vacuum bleeder for Maree's brakes. It will make the job heaps quicker.
     
  10. Luke300

    Luke300 Member

    If iam not working on the day i will attend.
     
  11. BoneZx

    BoneZx Active Member

    bring it on ash. i'll have my toolbox there.
     
  12. Danual

    Danual New Member

    If anyone has NA rotars, rear mainly they want to sell cheap and help install on this event, that would be amazing as mine are warped :)

    Would also buy a front bar second hand :p not as high priority
     
  13. oohogwash

    oohogwash Member

    option

    think i have an old pair of rotors of TT, not sure if the same.
     
  14. Danual

    Danual New Member

    Unsure also, hopefully someone can clarify this
     
  15. black baz

    black baz black 'n blue Bazemy

    Tech Day - Help needed .... !!!!

    Need to replace my Rear Main Seal and given my technical/mechanical ignorance, am looking for a couple of knowledgeable lads to lead the charge .....

    Any volunteers willing to assist ... ???? .... much appreciated.
     
  16. scottyoz1962

    scottyoz1962 Active Member

    Make sure you have all the bits Baz, rear main seal and the gaskets.
     
  17. oohogwash

    oohogwash Member

    Lady Z has three accessory guages that don't work if anyone is good at revamping them (actually the boost guage works...) others are oil pressure and water temp.
    I guess do the brake fluid first and these if you get a chance please
     
  18. scottyoz1962

    scottyoz1962 Active Member

    Gavan, i'll bring down the remains of an old TT Cluster i had, all the bits except the speedo worked, so might be able to do a swap over of the bits and get a working one.
     
  19. oohogwash

    oohogwash Member

    Thanks but I think its not that area.

    Its not the standard guages, its three accessory ones we put in the centre console. I am guessing its just a few wires disconnected as they worked at one stage...
     
  20. scottyoz1962

    scottyoz1962 Active Member

    Ahh ok , no worries Gavan.
     
Thread Status:
Not open for further replies.

Share This Page