Lean out ?? I think you mean RICH (air leaves the plenum AFTER the MAF's determined it, on boost. Under vacuum the mixture would be rich too,...
Well I've a Performance Engineering workshop based in Hervey Bay. I have a B Mech Eng, B Elec Eng, MSAE, MIAME. Been messing with these imports...
I agree that the 300' alloy fuel rails will experience heat soak and absorb radiant heat from its surroundings. Alloy's thermal conductivity is...
Wasn't directed at you in any way, just the guy who had a dig at my comment. What's HIS qualifications, patents etc...?? Fair enough, Who's up...
Ok, FYI, the standard BALANCER is a torsional vibration damper - It's got the inertia ring rubber bonded to the crank hub section. I'm looking at...
"I think alot on here dont particularly care about keeping it legal, kinda defeats the purpose of MODIFIED car" -Modified doesn't mean ILLEGAL...
Irridium's great for the turbo's too!!! But be prepared to try a couple of different heat ranges before settling on a final plug - Denso are good,...
Correct! Electricity will take the path of least resistance.. And right on the plug change bit too! Just a marketing ploy - how about the centre...
It's a little more more than pressure ratings !! Typically EFI hoses use a differing type of synthetic rubbers. Some, but not all hoses use a...
I run my own performance engineering company in Hervey Bay. I've tuned 10's of thousands of vehicles over 25 years in the industry (i've a cabinet...
Ah, someone who understands engine dynamics/harmonics/torsional vibration.. The VG does have a short crank, and does experience vibration issues...
Anyway, I've done a fair amount of research on replacing the hose (its the inner hose btw) and people basically recommend EFI hose and not normal...
Keep the mods legal - otherwise you'll need to spend heaps on fines, points and getting the thing fixed. EGR actually IMPROVES mileage and...
Really not worth the wasted money, never had good results uning any Splitfire plug (but plenty of bad ones from poor heat range ratings) - run...
Be sure to use EFI hose - not transmission hose as shown in the posts!! that will certainly fail and you'll have an engine bay fire (seen this all...
Separate names with a comma.
