Through this month. Incase anyone are in the want...
It went up to 800k huh? I would actually pay to see that... From a safe distance obviously
Haha. I guess that works in the end too. Just as throwing parts at a problem until it goes away :p
Here is one from a buddys BMW. Injector is just inside its usable pw [ATTACH] This is mine under load [ATTACH]
Here i am with my graphs and lectures again... First. We all (or at least the people being in this game for some time) live by the fact that as a...
And of course you can check the fpr the same way. Pinch the line at it and see if it hold pressure
Could be a loose clamp in the tank too but it would have to be pretty loose to drop pressure right away. Also it would struggle to actually build...
In the pump itself if im not mistaken. You probably have one in stock? Try blowing the wrong way see if it is possible. Anyways, the pinch test...
There is a valve in the tank that usually is forgotten Try to have a buddy pinch the line before the filter when you shut it off. Does it hold...
Could be the seals in the vtc sprockets themselfs. Not uncommon.
Yes nick. The 12 tooth setup just mimics the 24+1 cas disk
"stock" 58mm tb's. Jenvey eta2 motor
Depends. If the 5v is shorted to ground it will take out all the other sensors on that 5v feed too. Thus giving false data to the ecu
Good to hear it worked as advertised. Just a little heads up that i have picked up from other users. Dirt of any kind clogs up the hydramat in no...
Separate names with a comma.