QLD Full Brembo Brake kit/ rotors and braided lines

Discussion in 'Car Parts for Sale or Wanted' started by heavytrevy, May 10, 2009.

  1. heavytrevy

    heavytrevy "Hammer time "

    I have for sale,

    1.Full set of brembo GTR R33 calipers F/R with near new pads, excellant condition.

    2.Pair of DBA 5000 GTR slotted 324mm 2 peice rotors (less than 1000klm use)

    3.RDA 300mm slotted GTR rear rotors new in box.

    4.Full set of race spec Goodridge braided lines to suit the above.

    The entire kit is offered for $2900 plus postage,

    Pics only via email, and would prefer to sell the whole as a package.

    Regards
    Trev
     
  2. Tektrader

    Tektrader Z32 Hoe, service me baby

    If you split them up I would like the GTR rear calipers and maybe the rotors.



     
  3. East Coast Z

    East Coast Z Well-Known Member

    That's a very good price!
     
  4. heavytrevy

    heavytrevy "Hammer time "

    Forgot to mention the braided lines are new in packet

    Trev
     
  5. MikeZ32

    MikeZ32 das Über member

    if you split i will take the fronts! go halvies on post with me tekky?
     
  6. Tektrader

    Tektrader Z32 Hoe, service me baby

    Sure Mikey,

    These are off a Vspec R33 yes ?? I might take the braided lines as well. What price for them on their own?

    So if we do this Mikey we have basically bought the whole lot ???
     
  7. MikeZ32

    MikeZ32 das Über member

    pretty much man, i dont want the braided lines. you can have em :)

    just want the front calipers + rotors. i think between us we've got the whole lot covered.
     
  8. Tektrader

    Tektrader Z32 Hoe, service me baby

    Need to check the rears are what I think they are. Brembos off a Vspec R33

    If they are not from a vspec R33 they are not much different size wize than Z32 stockies.
     
  9. heavytrevy

    heavytrevy "Hammer time "

    off a GTR33 pad size is at least 25% bigger than stock zed size .Not to mention the rear rotor thickness is alot more .

    Trev

     
    Last edited: May 10, 2009
  10. Tektrader

    Tektrader Z32 Hoe, service me baby

    Trev, is the rotor diameter bigger as well ?? and is the hand brake drum diameter the same as the stock Z32 one ?

    Also, whats the diameter of the piston in the rear calipers ? And the lines, where did they come from ? are they the ones from the GB ? If they are. have they been changed over to the right ones Z32 suitable ones?

    Sorry for all the questions. :)
     
    Last edited: May 11, 2009
  11. heavytrevy

    heavytrevy "Hammer time "

    Rotor diameter is 300mm thicknes 30mm (Stock zed is 296 and 26 respectivley)
    Handbrake drum diameter is the same,
    no idea about piston size ,but could measure if need be.

    Brake lines are less than 3mths old brought from Uas and are the correct size ,not like the ones from the earlier GB.

    Trev
     
  12. Tektrader

    Tektrader Z32 Hoe, service me baby

    Hmmm, The rears dont seem bigger enough to warrant changing them. I may have to look for something bigger again. The Vspec calipers and rotors are even bigger again. :(

    Sorry to stuff you around.

    BUT if you split this package up I will take your GB lines at the GB price.

     
  13. East Coast Z

    East Coast Z Well-Known Member

    The Brembo brakes on the R33 GT-R & the R33 GT-R "V-Spec" are the same.
    These are the items required for a no modification fitment to the Z32.
     
  14. MikeZ32

    MikeZ32 das Über member

    you're mistaken there graham. the GTR rears have been 300mm x 30mm from R32GT-R VspecII up to R34GT-R Vspec. They only got bigger to 320mm x 30mm from R34GT-R VspecII onwards.
     
  15. heavytrevy

    heavytrevy "Hammer time "

    Correct, plus you won't get the 34vspecII to fit the zed either, pretty sure it shares the same bolt spacing as the rear 350z brembo's.

    Trev

     
  16. Tektrader

    Tektrader Z32 Hoe, service me baby

    ok, let me talk to Mikey about how we are going to figure out how we are going to split out the cost of the bundle.
     
  17. heavytrevy

    heavytrevy "Hammer time "

    Sold , pending payment.

    Trev
     

Share This Page