Z32 CATCH CANS

Discussion in 'Technical' started by SWH80, Sep 24, 2020.

  1. SWH80

    SWH80 Member

    Is a single 600ml Cusco catch can sufficient or are two required ( one per bank). Where is the ideal place to mount these. Any available pics would be appreciated. Thanks.
     
  2. ProckyZ89

    ProckyZ89 Senior Member

    You don’t actually “need one”

    just re route them into the intake accordions.

    if you do need to run one though one will do- generally beneath nose panel, or in the back corners of the engine bay is where a lot run them.
     
  3. MintZ32

    MintZ32 Active Member

    Was curious about this too, coming from an RB background where a catch can is all but essential, is the VG that much less prone to blow by in fairly mild states of tune?
     
  4. beaver

    beaver southern zeds

    There not essential for road driven zeds, a small amount of oil film in the intake plenum through the pcv's is normal.
     
  5. rob260

    rob260 Administrator Staff Member

    H Steve.

    One catch can is plenty and honestly size is not that important as you’re not going to be filling it up every time you go for a drive.

    I have installed a few under the nose panel. The plumbing is the biggest pain in the arse especially if you plan to run it back to the intake rather than vent to atmosphere.

    Mine is mounted where the battery used to be.

    Drop me a PM if you’re yet to make the purchase - I should be able to offer you a competitive price on a raceworks product.
     
  6. rob260

    rob260 Administrator Staff Member

    Not at all.
     

Share This Page