Engine Hose's

Discussion in 'Technical' started by C Theo, Jul 25, 2014.

  1. C Theo

    C Theo Chris Theodoulou

    Hi Guys,
    I have just taken the engine out of my 300zx and i am looking at replacing all the gaskets and hoses.

    I have found a kit from concept z performance for all the gaskets but can not find the hoses.

    Can anyone help me out at all where i can find them or find a list of all the hose's with part numbers and last option i can order each one from nissan with the part numbers.

    Any help would be much appreciated thanks guys
     
  2. Chrispy

    Chrispy Pretentious Upstart

    All the IACV/AAC/PCV hoses? Coz do kits for those. If just for vacuum hose go to Supercheap/Repco or equiv and buy them.
     
  3. 90TTZ

    90TTZ Back From The Dead

    All the coolant hoses for the turbos and under plenum is 8mm heater hose. Make sure you use heater hose and not fuel hose like the amount of engines I've repaired lately used has gone hard and started to leak!
     
  4. rob260

    rob260 Administrator Staff Member

    As above you can buy all the hoses from coz.

    Best to get complete PCV kit and complete idle air hose kit and heater core hose kit.

    Get OEM the silicone hoses he sells don't work with standard clamps and inconsistent lengths etc...
     
  5. p5yk3r

    p5yk3r el8 haqur

    You can always get silicone coolant specific hose for the turbo coolant lines as well and it comes in all sorts of colours.
     
  6. Fists

    Fists Well-Known Member

    Also, the vacuum lines for the brake and clutch boosters from czp wont work because of LHD/RHD differences, I'm just using stuff from http://stores.ebay.com.au/racinglife/ and haven't had any problems although you may prefer to get reinforced stuff. Using generic hose rather than molded ones might make your engine bay a bit messier but its much cheaper
     
  7. p5yk3r

    p5yk3r el8 haqur

    I got mine from z1 motorsports and they fit fine, moulded silicone.
     

Share This Page