VIC Parting out 1989 300ZX Twin Turbo manual 2+2

Discussion in 'Car Parts for Sale or Wanted' started by xyster, Jan 21, 2013.

  1. xyster

    xyster New Member

    Been parting out my 300ZX. Was originally an Auto.

    5 speed manual conversion (missing gear knob) $1000

    TT engine needs rebuild minus turbos and coil packs $500
    I rebuilt this a few months before, but a leaky water hose at the back and its buggered. knew i should have removed them! Spent $500 on the heads alone. Im happy to split this engine into parts if there is interest.

    Turbos, were working fine before engine break down. $400

    Headlights $50 each
    Door trims $50 pair (twead removed, and holes for tweaters)
    Targa tops $100 each
    Wheels $25 each
    Twead Passenger seat (manual adjust) $20
    Lower dash parts (normally twead but covered badly in blue vinyl) $40

    Front bumper gone, as have instrument cluster, radio surround, ECU and a few other bits here and there.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Have more listed on ebay
    http://www.ebay.com.au/sch/gary-melb/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

    and more photos on gumtree
    http://www.gumtree.com.au/s-ad/lanc...arga-2-2-5-speed-manual-twin-turbo/1012758882

    Im located in Lancefield. Prefer pickup, but will do postage where item is small enough to do so. Offers considered.
     
  2. Jandaca

    Jandaca Member

    would you sell the inlet cam gears off the engine...what type (stock, JUN etc, and where there noisy?
     
  3. xyster

    xyster New Member

    i'll split the engine (block, heads, inlet etc) if it doesnt sell soon.

    no strange noises from top end. will places pics up showing condition when I split the engine up (i'd like to this weekend)
     
  4. ZYTRAM

    ZYTRAM Formerly known as martini_Z

    Do you have compression figures for the engine? Is the head gasket blown?
     
  5. xyster

    xyster New Member

    cylinder 6 was lower than the rest. It was a few years ago now not sure of exact figure.

     
  6. xyster

    xyster New Member

    Separating manual parts. Gearbox, clutch master cylinder and shifter sold pending payment.

    Exhaust, rear hatch, driver side targa are sold.
     
  7. KEZA

    KEZA Zed Fiend

    I'll take the Headlights

    _________________________________________________________________

    Hi,
    I will take both Headlights. PM to follow.
     
  8. Peter Black

    Peter Black Active Member

    Might be interested in the heads depending on condition and price.
     
  9. xyster

    xyster New Member

    I'll part out the engine in the next few days and post photos.
     
  10. xyster

    xyster New Member

    Hatch, driver side Targa, manual pedals are sold.

    Have the engine apart. Doesnt seem to be any water in the cylinders. Headgasket doesnt look busted badly anywhere. except for a break near cylinder 4. Heads are in great condition.

    Will take offers for engine parts, or $500 motor minus coils and turbos.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  11. KEZA

    KEZA Zed Fiend

    What's happening

    with the Headlights Gary.
    Pm sent etc.

    Cheers
    Kerry
    :zlove:



     
  12. Jandaca

    Jandaca Member

    now that the engine is apart ...how much for the inlet cam gears?
     
  13. Terror-300ZX

    Terror-300ZX New Member

    have you got the driver side power window regulator?
     
  14. lakerzx

    lakerzx New Member

    How much of this is left? im interested in the upper rad support, windscreen and brake master cylinder.
     
  15. xyster

    xyster New Member

    sorry, only passenger side.

     
  16. xyster

    xyster New Member

    I have a couple of radiators and the top brackets, or do you mean cutting out the front of the car where the radiator sits?

    windscreen is there and is good.

    selling both with shell if that interests you.

    http://www.ebay.com.au/itm/11101391...LX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1288

    master cylinder is sold.

     
  17. xyster

    xyster New Member

    $30 each.

     
  18. C Theo

    C Theo Chris Theodoulou

    Have you got the steering wheel still?? im keen on that
     
  19. greenfoz

    greenfoz New Member

    how about the plastic clips that hold the window to the regulator? (yellow ones mounted on bottom of glass) one of mine snapped on the weekend
     
  20. jamersss

    jamersss Member

    Keen on cutting up your engine loom?
     

Share This Page