NSW Brake kit,pads,under drive pulley,injector,stock intercoolers,pod, LOTS OF PHOTOS

Brakes
R32gtr calipers (new seals ~10,000km ago) calipers have dodgey paint job.
Comes with DBA 4000 rotors (31.4, 31.6mm thickness left, brand new 32mm)
Has Bendix Ultimate pads in it with plenty of meat left.
Will also throw in a set of Ferodo Excel pads also with plenty of meat on them too.

Brakes will pull up better then standard 300zx calipers.
Setup was working well when on the car except the pads were squealing quite a bit.
These are small in diameter then the big brake upgrade kits but the benefits of these calipers and rotors is that you dont need the adaptors to fit, direct bolt on.
Surface rust on rotor is due to them sitting in the garage, rust will disappear after first few brakes.

$300 for the lot!










Ferodo 2500 pads for 300zx, 33gtst, s15

Front $250




Rear $200




Near new 555cc (615cc) Nismo injector. Was used once to flow test but never put into car. Flowed ~ 630cc at 40psi

$180






Unorthodox racing pulley, been on the car for 60,000km. Very good condition
Will supply with used accessory belts that are in good condition, no cracks.

$120






Stock intercoolers with ducts in ok condition. No cracks in plastic, a small dent in the bottom of one of the coolers.
$80 for both









Aluminium lower radiator with rubber hose. Came with 4 clamps but 1 is missing.
$50




HKS mushroom filter and adapter, has surface rust on the mesh cover
$40
and I will throw in the other 2 pods below for FREE.





Other 2 pods $10 each.





All prices do not include postage. Prefer pickup

Thanks

 

I'll have the UR UDP.

 

So these are a direct bolt on for NA's also?

 

Chrispy Pm sent

 

yes, the brakes will fit NA as well

 

These do bolt up to a NA. The brakes were originally on a NA zed.

 

Hey mijake, will u separate d cooler ducts?

 

Hey Pennyarvs,

I would rather keep them together atm but if theres no interest I will separate.

 

I understand. Thanks man. Let me know...

 

Hey Arvin, I have my old ducts lying here, yours if you want em. Ones bent a little out of shape but pretty sure a heat gun could set it straight again.

MoulaZX

 

Yahoo! Thanks mate! How much you want for them? Will pick them up later so I can check out your new exhaust as well.

 

Yahoo! Thanks mate! No worries with its condition. Will just try some experiment with them anyways. How much you want for them? Will pick them up later so I can check out your new exhaust as well.

 

im kinda interested in the brake kit. does anyone know if these would be much difference compared to stock NA zed brakes? If not a whole lot i might just wait it out and get a big brake kit later.

Pretty broke atm as well

 

Better then standard for sure. Not as good as the big brake kits but you dont have to have an adapter therefore costing less.

 

SOLD

Underdrive crank pulley with belts SOLD!

 

It's a bit of a bargain. DBA4000's aren't cheap new. And rebuilt calipers are nice. All I would do it get rid of the Bendix ultimates, dusty as!

 

Thanks Chrispy!

When I bought the calipers 2nd hand they were $300, the DBA4000 rotors were $400 for the pair, caliper rebuilt kit $60, the ultimates were $100, the excels were $60. Total = $920. Thats just under a grand.

Since they have been used and I no longer need them and they are noisy. I would say $300 is a pretty decent price.

Oh yes, and ultimates brake well for street use but dust up like hell!

 

32GTR brake setup SOLD!

 

make me offers for the rest of the stuff!

anyone need a set of Ferodo pads for the trackday coming up?

these are good pads to use for hard street use and light track use. Good bite when they get warm, kind on rotors and fade off slowly at their limit. Good pad to use if you dont want to change out street pads for track pads all the time.

 

Ferodo 2500s for the Front SOLD